Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
Interflon Metal Clean commonly used industrial cleaner.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS02
GHS07
GHS08
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H222: Extremely flammable aerosol.
- H229: Pressurized container: May burst if heated.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H350: May cause cancer.
- H336: May cause drowsiness or dizziness.
- H304: May be fatal if swallowed and enters airways.
Precautionary Statements
- P210: Keep away from heat/sparks/open flames/hot surfaces. - No smoking.
- P251: Pressurized container: Do not pierce or burn, even after use.
- P211: Do not spray on an open flame or other ignition source.
- P261: Avoid breathing mist/vapours/spray.
- P280: Wear protective gloves / eye protection / face protection.
- P273: Avoid release to the environment.
- P264: Wash thoroughly after handling.
- P271: Use only outdoors or in a well-ventilated area.
- P201: Obtain special instructions before use.
- P202: Do not handle until all safety precautions have been read and understood.
- P301+P310: If swallowed: Immediately call a poison center/doctor.
- P305+P351+P338: If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P321: Specific treatment (see on this label).
- P304+P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P312: Call a poison center/doctor if you feel unwell.
- P308+P313: IF exposed or concerned: Get medical advice/attention.
- P332+P313: If skin irritation occurs: Get medical advice/attention.
- P337+P313: If eye irritation persists: Get medical advice/attention.
- P331: Do NOT induce vomiting.
- P302+P352: If on skin: Wash with plenty of water.
- P362+P364: Take off contaminated clothing and wash it before reuse.
- P405: Store locked up.
- P410+P412: Protect from sunlight. Do not expose to temperatures exceeding 50C/122F.
- P403+P233: Store in a well-ventilated place. Keep container tightly closed.
- P501: Dispose of contents/container in accordance with local/regional/national/international regulations.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
Interflon b.v.
manufacturer
P.O. Box 1070 NL-4700 BB Roosendaal The Netherlands
NL
+31(0)165.55.39.11
+31(0)165.53.80.82
Interflon USA
undefined
555 Route 78 Suite 403 Swanton, Vermont 05488 USA
US
1 877 FIN LUBE (toll free)
1 877 491 7981
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
Emergency Contact
1-800-255-3924
US
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
MixturesGeneral Composition
Blend of solvents. Propellant gas carbon dioxide.
Chemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C6-C7, n-alkanes, isoalkanes, cyclics, <5% n-hexane EC: 921-024-6 | N/A | 25-50% | ⚠️ Hazardous |
| ethanol EC: 200-578-6 | 64-17-5 | 25-50% | ⚠️ Hazardous |
| 1,3-dioxolane EC: 211-463-5 | 646-06-0 | 2.5-10% | ⚠️ Hazardous |
| propan-2-ol EC: 200-661-7 | 67-63-0 | 2.5-10% | ⚠️ Hazardous |
| cyclohexane EC: 203-806-2 | 110-82-7 | 2.5-10% | ⚠️ Hazardous |
| carbon dioxide EC: 204-696-9 | 124-38-9 | 2.5-10% | ⚠️ Hazardous |
| n-hexane EC: 203-777-6 | 110-54-3 | 2.5% | ⚠️ Hazardous |
Additional Information
Note: Any entry in the EC column that begins with the number "9" is a Provisional List Number provided by ECHA pending publication of the official EC Inventory Number for the substance. See Section 16 for additional CAS number information for the substance. For the wording of the listed risk phrases refer to section 16.
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
In case of unconsciousness place patient stably in side position for transportation.
🖐️ Skin Contact
Immediately wash with water and soap and rinse thoroughly.
👁️ Eye Contact
Rinse opened eye for several minutes under running water. If symptoms persist, consult a doctor.
🍽️ Ingestion/Swallowing
If symptoms persist consult doctor.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
No further data; see item 7.
🧤 Hand Protection
Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. Protective gloves. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. Practical experience has shown that gloves of Nitril offer sufficient protection. Glove thickness: 0,13 mm. Breakthrough time: > 15 minutes. The exact break trough time has to be found out by the manufacturer of the protective gloves and has to be observed.
👁️ Eye Protection
Tightly sealed goggles
😷 Respiratory Protection
Do not breathe vapour and sprayer mist. Ventilation or extraction. Use suitable respiratory protective device in case of insufficient ventilation. Filter A/P2
🦺 Skin/Body Protection
Protective work clothing
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
UN1950
📦 Proper Shipping Name
Aerosols, ENVIRONMENTALLY HAZARDOUS
⚠️ Transport Hazard Class
2.1
📋 Packing Group
Void
🚛 ADR Transport Precautions
Warning: Gases
🚢 IMDG Maritime Transport Precautions
Warning: Gases
✈️ IATA Air Transport Precautions
Warning: Gases
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for Interflon Metal Clean?
The signal word for this substance is "danger".
What is Interflon Metal Clean used for?
Industrial cleaner
What are the hazard statements for Interflon Metal Clean?
This substance has 7 hazard statements: H222: Extremely flammable aerosol. H229: Pressurized container: May burst if heated. H315: Causes skin irritation. H319: Causes serious eye irritation. H350: May cause cancer. H336: May cause drowsiness or dizziness. H304: May be fatal if swallowed and enters airways.
What is the melting point of Interflon Metal Clean?
The melting point is Undetermined. and the boiling point is < 0 C (< 32 F).