Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- TEST INK / PENS PINK 30 - 44 mN/m
- Product Form
- INK / PENS
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- see annex of this safety data sheet.
Identified Uses
Determination of the surface tension and surface cleanliness of solids (films / moulded parts) made of plastic, metal, glass etc.
Uses advised against
Do not use for products which come into contact with foodstuffs. Do not use for private purposes (household).
Manufacturers & Suppliers
arcotest GmbH
manufacturer
Rotweg 25, 71297 Mönsheim, Germany
+49 7044 9022 70
http://www.arcotest.info
Emergency Contacts
Emergency Contact
+49 170 5351 781
24h
DE, EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air
Rinse with plenty of water. Remove contaminated clothing.
Rinse with plenty of water. Consult an ophthalmologist in case of eye irritation.
Drink plenty of water immediately (maximum 2 glasses). Consult a doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water, carbon dioxide (CO₂), foam, extinguishing powder
Flammable substances, vapours are heavier than air and spread over the floor. Intense heating may cause explosive mixtures with air to form.
Firefighter Protection
Do not stay in the danger area without self-contained breathing apparatus. Avoid skin contact by keeping a safe distance or wearing suitable protective clothing.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not inhale vapours/aerosols. Avoid substance contact. Ensure adequate ventilation. Evacuate the danger zone, observe emergency procedures, consult an expert.
Do not empty into drains. Risk of explosion.
Absorb with liquid-binding material. Send for disposal. Clean up area.
Materials: liquid-binding material
Related Products
Similar products with comparable safety profiles
TEST INK / PENS PINK 45 - 60 mN/m
UFI: see annex of this safety data sheet.
Test ink 30 - 56 mN/m
---
Test ink 30 - 56 mN/m
UFI: YFYC-9HCG-9F3Q-SPGS, 5JYC-TH1V-MF37-E12U, 0NYC-9HR8-WF3Q-3CNW, DQYC-THEP-7F36-RQ7Y, 6TYC-AH42-HF3Q-E1U1, XWYC-THTF-UF36-2DE3, 6YYC-AHGV-4F3P-RR05, D20D-UH68-FF36-D2K7, 050D-AHVN-RF3P-2E59, M70D-UHK2-2F35-QRRC, PA0D-CH8F-CF3P-D3AE, VE0D-UHXU-PF35-1EWG, 5G0D-CHN7-YF3N-QSGJ, 3K0D-VHAN-9F35-C42M, SP0D-DH11-KF3N-1FNP, KR0D-VHQE-WF34-PT7R, UU0D-DHDU-6F3N-C4TT, 6X0D-WH37-HF34-0GDV
Test ink 30 - 56 mN/m
---
TEST INK / PENS arcotest ® ORGANIC 30-46 mN/m (BIO)
---
TEST INK / PENS arcotest ® ORGANIC 48-60 mN/m (BIO)
---
FIBER PENS INK
---
FIBER PENS INK
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid formation of aerosols. Keep container tightly closed
Keep tightly closed. Recommended storage temperature: 15 – 25 °C
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
The method for measuring the workplace atmosphere must comply with the requirements of DIN EN 482 and DIN 689.
In full contact: Hand protection material: Nitrile rubber, Layer thickness 0.40 mm, > 480 min breakthrough time. With splash contact: Hand protection material: nitrile rubber, Layer thickness 0.11 mm, >240 min breakthrough time. The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the resultant standard EN 374, for example KCL 706 Lapren® (full contact), KCL 741 Dermatril® L (splash contact).
Safety goggles
Required when vapours/aerosols are generated. Recommended filter type: filter A. The operator must ensure that the maintenance, cleaning and testing of breathing apparatus is carried out and documented in accordance with the manufacturer's user information.
Body protection needs to be selected specifically for the workplace based on the concentration and volume of hazardous substances. The chemical resistance of the protective equipment should be ascertained with the respective supplier. It is advisable to use special skin barrier cream to protect the skin.
Do not empty into drains
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is chemically stable under normal ambient conditions (room temperature).
Intense heating may cause explosive mixtures with air to form.
Violent reactions are possible with mineral acids, strong oxidising agents
Intense heating. A range from approx 15 Kelvin below the flash point is to be considered critical.
No information available
No information available
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Waste shall be separated in such a way that it can be treated separately by municipal or national waste facilities.
This product and its container must be disposed of as hazardous waste.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- not assigned
- Packing Group
- not assigned
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Regulatory information for TEST INK / PENS PINK 30 – 44 mN/m
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for TEST INK / PENS PINK 30 - 44 mN/m?
The signal word is warning.
What is the physical form of TEST INK / PENS PINK 30 - 44 mN/m?
TEST INK / PENS PINK 30 - 44 mN/m is a liquid appearing as liquid pink with pink color. It has nearly odourless odor.
What is the solubility of TEST INK / PENS PINK 30 - 44 mN/m?
no information available.
What is TEST INK / PENS PINK 30 - 44 mN/m used for?
Determination of the surface tension and surface cleanliness of solids (films / moulded parts) made of plastic, metal, glass etc.
What are the hazard statements for TEST INK / PENS PINK 30 - 44 mN/m?
This substance has 4 hazard statements:
- H302: Harmful if swallowed.
- H315: Causes skin irritation.
- H319: Causes serious eye irritation.
- H361d: Suspected of damaging the unborn child.
What is the melting point of TEST INK / PENS PINK 30 - 44 mN/m?
The melting point is between -40 and -6°C and the boiling point is between 196 and 252°C at 1013 hPa.