Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Immersol™ 518 N
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Immersion oil for microscopy, halogen-free
Manufacturers & Suppliers
Carl Zeiss Jena GmbH
manufacturer
Carl-Zeiss-Straße 22, D-73447 Oberkochen
+49 7364 20-0
Emergency Contacts
Poisening Control Center
+49 551 19240
24 hours
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Manage your Safety Data Sheets
Organize and access chemical safety data with ease
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Adipic acid-di(8-methyl-tricyclo(5.2.1.0.2.6.) decane) ester | 195371-10-9 | 40 - 45% | Yes |
| Bis (isopropyl) naphthalene EC: 254-052-6 | 38640-62-9 | 20 - 25% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Provide with fresh air. In the case of inhalation of aerosol/mist consult a physician if necessary.
Wash off with soap and plenty of water. In the case of skin irritation or allergic reactions see a physician.
Symptoms: skin irritation or allergic reactions
Rinse immediately with plenty of water for at least 5 minutes. If symptoms persist, call a physician.
Rinse mouth. Only trained first-aid staff may induce vomiting. Consult a physician.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Carbon dioxide (CO2), Dry chemical, Foam, water spray jet
High volume water jet
In case of fire formation of carbonoxides and other toxic gases/vapors is possible. In the event of fire and/or explosion do not breathe fumes.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration.
Soak up with inert absorbent material. Sweep up and shovel into suitable containers for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes.
Keep only in the original container. Keep tightly closed. Protect from direct insolation.
Normal measures for preventive fire protection.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Avoid contact with skin. Use protective gloves which have been adapted to the respective purpose and are appropriately resistant to chemicals (DIN EN 374). Ask the glove supplier for the penetration time of the glove material.
Avoid contact with eyes, if necessary wear eye protection.
Not required; except in case of aerosol formation.
Keep working clothes separately.
see section 6
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored and applied as directed.
None known.
Protect from heat, heating sources and direct insolation.
None known. Hazardous decomposition products in the event of fire: Carbon monoxide, carbon dioxide and unburned hydrocarbons (smoke).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
In accordance with local and national regulations.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Labelling according to Regulation (EC) No. 1272/2008 (GHS) and Directive 67/548/EEC or Directive 1999/45/EC.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Immersol™ 518 N?
The signal word is warning.
What is the physical form of Immersol™ 518 N?
Immersol™ 518 N is a liquid with colourless color. It has slight aromatic odor.
What is Immersol™ 518 N used for?
Immersion oil for microscopy, halogen-free
What are the hazard statements for Immersol™ 518 N?
This substance has 1 hazard statement:
- H315: Causes skin irritation