Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Paxman Orbis C
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Low viscosity non-toxic antifreeze and secondary refrigerant based on potassium formate with inhibitor functions designed for use in process cooling, refrigeration and HVAC systems
Uses advised against
This product is not recommended for any industrial, professional or consumer use other than the identified uses above.
Manufacturers & Suppliers
Paxman Coolers Ltd.
International House, Penistone Road, Fenay Bridge, Huddersfield, HD8 0LE, United Kingdom
Emergency Contacts
Paxman Coolers Ltd.
+44 (0) 1484 349 444
Mon-Thu 9.30am-4.30pm GMT & Fri 9.30am-4pm GMT
Emergency Contact
+44 (0) 1792 572296
24HOUR
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Potassium formate EC: 209-677-9 | 590-29-4 | 10 - 30% | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move the affected person to fresh air. Get medical attention if any discomfort continues.
Symptoms: No expected adverse symptoms.
Remove contaminated clothing immediately and wash skin with soap and water. Get medical attention if any discomfort continues.
Symptoms: There may be mild irritation at the site of contact.
Remove any contact lenses and open eyelids wide apart. Rinse immediately with plenty of water. Continue to rinse for at least 15 minutes. Get medical attention if any discomfort continues..
Symptoms: There may be irritation and redness.
Do not give an emetic or induce vomiting. Rinse mouth thoroughly with water. Move the affected person to fresh air and keep warm and at rest in a position comfortable for breathing. Get medical attention if any discomfort continues.
Symptoms: There may be irritation of the throat.
Immediate Medical Attention
No specific recommendations given, but first aid may still be required in case of accidental exposure, inhalation or ingestion of this chemical. If in doubt, get medical attention promptly and present a copy of this Safety Data Sheet.
Medical Treatment
No specific recommendations. Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Extinguish with alcohol-resistant or polymer foam, carbon dioxide (CO2) or dry chemical powder..
When heated and in the case of a fire, harmful vapours/gases (such as carbon monoxide and carbon dioxide) may be formed.
Move containers away from fire area if this can be done without risk. Keep people away, isolate the fire and deny unnecessary entry. Use water fog to keep fire-exposed containers cool and disperse vapours.
Firefighter Protection
Wear self contained breathing apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Stop leak/release if possible to do so without risk.
Do not discharge into drains, water courses or onto the ground.
Absorb spillage with inert, damp, non-combustible material, then flush the contaminated area with water. Collect and place in suitable waste disposal containers and seal securely.
Materials: inert, damp, non-combustible material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid spilling and contact with the skin and the eyes as well as direct inhalation of sprays and mists.
Store in tightly-closed, original containers. Keep separate from food, feedstuffs, fertilisers and other sensitive material. Do not store near heat sources or expose to high temperatures. Keep away from heat, sparks and open flame.
Do not eat, drink or smoke in work areas and wash hands after handling this product.
Keep away from heat, sparks and open flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Methods to prevent or control exposure are preferred. Provide adequate ventilation to minimise the risk of inhalation of sprays and mists.
PVC/butyl rubber/neoprene gloves are recommended.
Wear approved chemical goggles or face shield.
No special precautions are needed unless mists of the product are generated in which case a respirator must be worn.
Overalls should be worn. Wear suitable protective clothing/footwear as protection against splashing or contamination.
Product not classified as an environmental hazard - no specific environmental exposure controls required.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable
Strong oxidising agents. Strong acids.
There are no known hazardous reactions associated with this product.
Heat.
Avoid strong oxidising agents. Strong acids.
No decomposition if used and stored according to specifications.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Small spillages: Wash to the trade effluent if consents are in place with local water companies. Ensure that local water consents are met. Large spillages: The material should be sent to a specialised waste contractor for disposal.
Dispose of waste and residues in accordance with local authority and/or local sewage treatment plant requirements.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Guidance notes: CHIP for everyone HSG228. Approved Classification and Labelling Guide (Sixth edition) L131. Safety Data Sheets for substances and preparations.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Paxman Orbis C?
The signal word is no signal word.
What is the physical form of Paxman Orbis C?
Paxman Orbis C is a clear liquid appearing as clear liquid with purple color. It has negligible odour odor.
What is the solubility of Paxman Orbis C?
Soluble in water
What is Paxman Orbis C used for?
Low viscosity non-toxic antifreeze and secondary refrigerant based on potassium formate with inhibitor functions designed for use in process cooling, refrigeration and HVAC systems
What is the melting point of Paxman Orbis C?
The melting point is -60°C (potassium formate @ 70% wt/wt) and the boiling point is >100°C.