MINCLEAR N189IF

No special measure; Take the victim into open air; keep them warm and calm. If breathing is irregular or stops, perform artificial respiration.

No special measure; Remove contaminated clothing.

No special measure. Remove contact lenses, if present and if it is easy to do. Wash eyes with plenty of clean and cool water for at least 10 minutes while pulling eyelids up and seek medical assistance. Do not let the person to rub the affected eye.

Symptoms: pain in the eyes because of dust entry.

No special measure; Keep calm. NEVER induce vomiting.

Use a dry water, powder, foam, or CO2 fire extinguisher to extinguish the surrounding fire. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

No restriction on the extinguishing media to be used in cases of fire in its vicinity.

The material is not flammable, and it does not support fire.

Avoid generation of dust. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.

If product is released from trucks in roads, place signposts to divert traffic and remove the spill using vacuum cleaning systems

Product not classified as hazardous for the environment, avoid spillage as much as possible.

Use vacuum suction unit, or shovel into bags.

The product does not require special handling measures, the following general measures are recommended: For personal protection, see section 8. In the application area, smoking, eating, and drinking must be prohibited. Follow legislation on occupational health and safety. Never use pressure to empty the containers. They are not pressure-resistant containers. Keep the product in containers made of a material identical to the original.

Store the containers between 5 and 35 °C, in a dry and well-ventilated place. Keep away from oxidising agents and from highly acidic or alkaline materials. Once the containers are open, they must be carefully closed and placed vertically to prevent spills.

General occupational hygiene measures are required to ensure safe handling of the substance. These measures involve good personal and housekeeping practices (i.e. regular cleaning with suitable cleaning devices), no drinking, eating and smoking at the workplace. Shower and change clothes at end of work shift. Do not wear contaminated clothing at home.

The product is not flammable. No special protective measures against fire required.

This material should only be used for industrial purposes

Protective gloves. <CE> marking, category II. CEN standards: EN 374-1, En 374-2, EN 374-3, EN 420. Material: PVC (polyvinyl chloride). Breakthrough time: > 480 min. Thickness: 0,35 mm. Maintenance: Keep in a dry place, away from any sources of heat, and avoid exposure to sunlight as much as possible. Do not make any changes to the gloves that may alter their resistance, or apply paints, solvents or adhesives. Observations: Gloves should be of the appropriate size and fit the user's hand well, not being too loose or too tight. Always use with clean, dry hands.

Protective goggles against particle impacts. «CE» marking, category II. Eye protector against dust and smoke. CEN standards: EN 165, EN 166, EN 167, EN 168. Maintenance: Visibility through lenses should be ideal. Therefore, these parts should be cleaned daily. Protectors should be disinfected periodically following the manufacturer's instructions. Observations: Some signs of wear and tear include: yellow colouring of the lenses, superficial scratching of the lenses, scraping etc.

Particle filter mask. <CE> marking, category III. Made of filtering material, it covers nose, mouth and chin. CEN standards: EN 149. Filter Type: Type FFP1 or FFP3 (European Norm 143). Maintenance: Check for any tears, defects, etc. before use. Since it is disposable individual protection equipment, it should be replaced after use. Observations: Does not protect worker unless properly adjusted. Follow the manufacturer's instructions regarding suitable use of the equipment.

Work footwear. «CE» marking, category II. CEN standards: EN ISO 13287, EN 20347. Maintenance: This product adapts to the first user's foot shape. That is why, as well as for hygienic reasons, it should not be used by other people. Observations: Work footwear for professional use includes protection elements aimed at protecting users against any injury resulting from an accident.

Stable under the recommended handling and storage conditions (see section 7).

The product does not present hazards by their reactivity.

The product does not present possibility of hazardous reactions.

Avoid any improper handling. Minimise exposure to air. Slippery when wet

Avoid storing together with materials that may be affected by dust. Keep away from oxidising agents and strongly alkaline or acidic materials to avoid exothermic reactions.

No decomposition if used for the intended uses.

Do not dump into sewers or waterways. Waste and empty containers must be handled and eliminated according to current, local/national legislation. Follow the provisions of Directive 2008/98/EC regarding waste management.

Dispose in such a way to avoid dust generation. Where possible, recycling should be preferred to disposal.