Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- FLUIDIRAM 797
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- VN20-308E-J00M-P6M0
Identified Uses
Formulation of fuel additives, lubricants and coating agents for fertilizers; Industrial use as coating agent for fertilizers
Manufacturers & Suppliers
ARKEMA
manufacturer
420 rue d'Estienne d'Orves, 92705 Colombes Cedex, FRANCE
+33 (0)1 49 00 80 80
http://www.arkema.com
Emergency Contacts
Emergency Contact
+33 1 49 00 77 77
European emergency phone number
112
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS08
GHS09
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Preparation based on fatty amines derivatives. Contains unclassified mineral oils and waxes, note N/L
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Fatty acids, C16-18, compds. with C16-18-alkyl amines EC: 800-984-9 | 1428547-35-6 | 15% | Yes |
| Amines, C16-18-alkyl EC: 292-550-5 | 90640-32-7 | 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. Oxygen or artificial respiration if needed. Keep under medical surveillance. In case of persistent problems : Hospitalise.
Wash off immediately with soap and plenty of water. Burns caused by molten material require hospital treatment.
Wash open eyes immediately, abundantly and thoroughly for at least 15 minutes. Consult an ophthalmologist immediately.
Do NOT induce vomiting. Consult a physician.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam, carbon dioxide, dry powder extinguishers., Use suitable means to extinguish neighbouring fires.
Water jet.
Formation of toxic products through combustion: nitrogen oxides, Carbon oxides, Organic derivatives
Cool closed containers exposed to fire with water spray.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Complete suit protecting against chemicals.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Evacuate area of all unnecessary personnel.
Do not release into the environment.
collect with non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite). Sweep up to prevent slipping hazard.
Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Smoking, eating and drinking should be prohibited in the application area.
Keep container tightly closed in a dry and well-ventilated place. Provide impermeable floor.
Wash hands after handling. Remove contaminated clothing and protective equipment before entering eating areas.
Provide waterproof electrical equipment.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide appropriate exhaust ventilation at machinery.
If splashes are likely to occur, wear: - Heat insulating gloves - Wear impermeable insulated gloves when handling hot. - Protective gloves complying with EN 374. - Request information on glove permeation properties from the glove supplier., The suitability for a specific workplace should be discussed with the producers of the protective gloves.
Face-shield, or, Safety glasses with side-shields conforming to EN166, Eye wash bottle with pure water
Wear a respirator if necessary. In case of spillage, wear a mask. Recommended Filter type: Filter type AK. Avoid breathing dust or vapour., In the case of vapour formation use a respirator with an approved filter.
Protective suit
See chapter 6
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No data available.
Stable under recommended storage conditions.
No data available.
No data available.
Powerful oxidants, strong acids and organohalogenated compounds.
Possible formation of carbon oxides, nitrogen oxides and hazardous organic compounds.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Incinerate in suitable incineration plant, observing local authority regulations.
The product should not be allowed to enter drains, water courses or the soil. Incinerate in suitable incineration plant, observing local authority regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 3077
- Shipping Name
- ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. MOLTEN (FATTY ACIDS, C16-18, COMPDS. WITH C16-18-ALKYL AMINES, AMINES, C16-18-ALKYL)
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Safety data sheets: accordance with Annex II of Regulation (EC) No 1907/2006 and its amendment(s)
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for FLUIDIRAM 797?
The signal word is danger.
What is the physical form of FLUIDIRAM 797?
FLUIDIRAM 797 is a solid appearing as solid with beige color. It has no data available. odor.
What is FLUIDIRAM 797 used for?
Formulation of fuel additives, lubricants and coating agents for fertilizers; Industrial use as coating agent for fertilizers
What are the hazard statements for FLUIDIRAM 797?
This substance has 3 hazard statements:
- H318: Causes serious eye damage.
- H373: May cause damage to organs through prolonged or repeated exposure.
- H410: Very toxic to aquatic life with long lasting effects.
What is the melting point of FLUIDIRAM 797?
The melting point is ca. 70 °C and the boiling point is No data available..