Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Praepagen TQ RT
- Product Code
- 183691
- Chemical Name
- Fatty acids, C16-18 (even numbered) and C18 unsatd., reaction products with triethanolamine, di-Me sulfate-quaternized in Isopropanol
Regulatory Identifiers
- CAS Number
- 91995-81-2 Check regulations →
- EC Number
- 931-203-0 Check regulations →
Identified Uses
Industry sector: Detergents KA. Type of use: Raw material for the production of soft wash rinsing agents.
Manufacturers & Suppliers
Global Amines Germany GmbH
global supplier
Brüningstraße 50 65929 Frankfurt
+49 69 305 18000
Emergency Contacts
Emergency Contact
00800-5121 5121
24 h
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Fatty acids, C16-18 (even numbered) and C18 unsatd., reaction products with triethanolamine, di-Me sulfate-quaternized | 1335202-88-4 | 90 - 100% | Yes |
| Propan-2-ol EC: 200-661-7 | 67-63-0 | 1 - 10% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove to fresh air.
In case of contact, immediately flush skin with soap and plenty of water.
In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
If swallowed, seek medical advice immediately and show this container or label.
Immediate Medical Attention
If swallowed, seek medical advice immediately and show this container or label.
Medical Treatment
Treat symptomatically.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray jet Alcohol-resistant foam Carbon dioxide (CO2) Dry powder
In case of fires, hazardous combustion gases are formed: Carbon monoxide (CO) Nitrogen oxides (NOx) Sulphur dioxide
Firefighter Protection
Self-contained breathing apparatus. Wear suitable protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Ensure adequate ventilation. Wear suitable protective clothing. Keep away sources of ignition.
Do not allow to enter drains or waterways
Soak up with inert absorbent material
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Provide adequate ventilation. Handle and open container with care.
- frost-sensitive - if the product becomes turbid as a result of exposure to low temperatures, warm it slowly to approx. 50°C and stir it. Before using the product, ensure that is is completely homogeneous.
Wash hands before breaks and at the end of workday. Use protective skin cream before handling the product. Take off immediately all contaminated clothing and wash it before reuse.
Traces of flammable substances can collect in the vapour space of closed systems, therefore keep sources of ignition away.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Break through time : 480 min, Glove thickness : 0,7 mm, Remarks : Long-term exposure Impervious butyl rubber gloves. Break through time : 30 min, Glove thickness : 0,4 mm, Remarks : For short-term exposure (splash protection): Nitrile rubber gloves. These types of protective gloves are offered by various manufacturers. Please note the manufacturers' detailed statements, especially about the minimum thickness and the minimum breakthrough time. Consider also the particular working conditions under which the gloves are being used.
Safety glasses
not required under normal use. In the case of dust or aerosol formation use respirator with an approved filter. Suitable mask with particle filter P3 (European Norm 143). Applicable national Regulations must be observed. Take note of the limitations regarding wear-time, in conjunction with the Regulations for the use of Respiratory Protective Equipment.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
See section 10.3. "Possibility of hazardous reactions"
No dangerous reaction known under conditions of normal use.
None known.
not known
When handled and stored appropriately, no dangerous decomposition products are known
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN 1993
- Shipping Name
- Flammable liquid, n.o.s.
- Transport Class
- 3
- Packing Group
- III
Shipment permitted
Shipment permitted
Shipment permitted
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Praepagen TQ RT?
The signal word is warning.
What is the physical form of Praepagen TQ RT?
Praepagen TQ RT is a solid/liquid with white to slightly yellow color. It has of isopropanol odor.
What is the solubility of Praepagen TQ RT?
dispersible in water; soluble in isopropanol
What is Praepagen TQ RT used for?
Industry sector: Detergents KA. Type of use: Raw material for the production of soft wash rinsing agents.
What are the hazard statements for Praepagen TQ RT?
This substance has 2 hazard statements:
- H226: Flammable liquid and vapour.
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of Praepagen TQ RT?
The melting point is 45 - 55 °C and the boiling point is approx. 92 °C.