Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- PRO BUBBLE FLUID
- Product Code
- MFX3001, MFX3003
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Soap bubbles. For professional use only.
Uses advised against
Please consult manufacturer.
Manufacturers & Suppliers
Magic FX B.V.
manufacturer
Schouwrooij 27, NL-5281 RE Boxtel
+31 (0)411-748100
http://www.magicfx.eu
Emergency Contacts
MAGIC FX
+31 (0)411 74 81 00
During office hours
National Poisoning Information Center (NL)
+31(0)30 274 8888
Belgium Anti Poison Center
+32(0)70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| bronopol (INN);2-bromo-2-nitropropane-1,3-diol EC: 200-143-0 | 52-52-7 | 0.05% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
There are no special measures required.
Flush with water.
Symptoms: Product is not classified skin irritant.
Remove contact lenses. Rinse open eyes immediately and long enough with plenty of water.
If swallowed do not induce vomiting. If possible give defoaming pharmaceutical against flatulences, e.g. Lefax®, Espumisan®, etc. Immediately wash out mouth thoroughly with water and rinse water back out. In case of vomit keep the head in deep position to prevent aspiration of vomit.
Immediate Medical Attention
In case of doubt, consult medical attention for direct exposure to the chemical product or persistent discomfort. For persistent symptoms [in eyes], consult an oculist.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Not applicable; product is non-flammable.
Not applicable; product is non-flammable.
Fire will result in dense smoke. Exposure to combustion products may harm your health. Closed containers, which are exposed to fire, should be cooled with water.
Adapt firefighting measures on surrounding fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Might cause slipperiness.
Prevent that a large quantity of product enters drains/surface, water/ground-water or soil/subsoil.
Wherever possible cleaning should be performed with normal cleaning agents. Avoid use of solvents.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Smoking, drinking and consumption of food is not allowed in the work area.
Keep away from heat and direct sunlight and frost. Store in a cool and dark place to ensure the product quality. Keep container tightly closed.
Smoking, drinking and consumption of food is not allowed in the work area.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Apply standard precautions during use of the product. Avoid inhalation of vapours.
In case of permanent exposure over long periods of time, the use of 0.08 Latex gloves is advised.
In case of permanent exposure over long periods of time, the use of EN 166 approved safety glasses with side shields is advised.
No specific requirements
No specific requirements.
No specific requirements.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is not degraded when used as specified in section 1.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for PRO BUBBLE FLUID?
The signal word is no signal word.
What is the physical form of PRO BUBBLE FLUID?
PRO BUBBLE FLUID is a viscous liquid appearing as colourless to slightly yellow, transparent viscous liquid with colourless to slightly yellow color. It has odourless, some samples of product-specific odour odor.
What is the solubility of PRO BUBBLE FLUID?
Completely soluble
What is PRO BUBBLE FLUID used for?
Soap bubbles. For professional use only.
What is the melting point of PRO BUBBLE FLUID?
The melting point is -4 to 0°C and the boiling point is 100 to 102 °C.