NextSDS Logo
Safety Data Sheet EN

Corncob Particles (HS 2308.00.9900)

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
Corncob Particles (HS 2308.00.9900)

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Inert Carrier, Absorbent

Manufacturers & Suppliers

G

Green Products Company

manufacturer

16902 290th. Street, Conrad, IA 50621

(641) 366-2001

Emergency Contacts

Emergency Contact

911

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified warning

Hazard Classifications

STOT SE Cat. 3
Skin Irrit. Cat. 3
Eye Irrit. Cat. 2B

GHS Pictograms

GHS07 - Health hazard

GHS07

Hazard Statements

H316 May Cause mild skin irritation
H320 May Cause eye irritation
H335 May cause respiratory irritation

Precautionary Statements

P261 Avoid breathing dust
P332 If skin irritation occurs: Get Medical Advice
P501 Dispose of contents/container in accordance with local/regional/national/international rules
IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses if present—continue rinsing
If eye irritation persists get medical advice/attention
IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
Corncob Particles --- 100% No
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to fresh air. Obtain medical attention if irritation persists.

Skin contact

Wash affected areas with soap and water. Seek medical attention if irritation persists. Wash contaminated clothing before re-use.

Eye contact

Immediately flush eyes with plenty of water for at least 20 minutes. Remove contact lenses if present. Get medical attention if irritation develops or persists.

Ingestion

If alert and not convulsing, give one glass of water to dilute material. Seek medical attention.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water, dry chemical

Firefighter Protection

Wear self-contained breathing apparatus (SCBA) and full protective equipment.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Cleanup methods

Vacuum, sweep or shovel. Follow normal clean up procedure for non-hazardous material

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Proper Personal Protective Equipment (PPE) should be worn while handling, be mindful of excessive heat sources

Storage

Store in cool, dry, well-ventilated area

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Hands

cotton gloves recommended if above nuisance level TLV, not required

Eyes

Safety goggles or face shield recommended

Respiratory

NIOSH approved dust mask recommended. Required if above nuisance level TLV

Skin/Body

Long sleeves recommended if above nuisance level TLV, not required

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
Tan granules
Colour
Tan
Colour Intensity
---
Form
granules
Odor
essentially odorless
Odor Threshold
---
Ph
---
Melting Point
Not Available
Boiling Point
Not Available
Flash Point
350°F Open Cup, 388°F Closed Cup
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
Not Available
Vapor Pressure
Not Available
Vapor Density
Not Available
Relative Density
---
Bulk Density
673 Kg/m³
Density
---
Flammability
---
Upper Explosive Limit
Not Available
Lower Explosive Limit
Not Available
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
---
Solubility
---
Partition Coefficient
---
Solubility In Water
Not Available
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Product is stable

Avoid

Excessive heat (over 300°F)

Incompatible

Strong acids, oxidizing agents and caustics

Decomposition

Combustion products may be Carbon Monoxide (CO) and Nitric Oxide (NOₓ)

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for Corncob Particles (HS 2308.00.9900)?

The signal word is warning.

What is the physical form of Corncob Particles (HS 2308.00.9900)?

Corncob Particles (HS 2308.00.9900) is a solid appearing as tan granules with tan color. It has essentially odorless odor.

What is Corncob Particles (HS 2308.00.9900) used for?

Inert Carrier, Absorbent

What are the hazard statements for Corncob Particles (HS 2308.00.9900)?

This substance has 3 hazard statements:

  • H316: May Cause mild skin irritation
  • H320: May Cause eye irritation
  • H335: May cause respiratory irritation

What is the melting point of Corncob Particles (HS 2308.00.9900)?

The melting point is Not Available and the boiling point is Not Available.