Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- LOCTITE ABLESTIK JM 7000 known as Ablebond JM7000 (9g)
- Product Code
- 1286239
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Adhesive
Uses advised against
None identified
Manufacturers & Suppliers
Henkel Corporation
manufacturer
One Henkel Way, Rocky Hill, Connecticut 06067
+1 (860) 571-5100
www.henkelna.com
Emergency Contacts
Poison Control Center
1-877-671-4608
Poison Control Center
1-303-592-1711
CHEMTREC
1-800-424-9300
CHEMTREC
1-703-527-3887
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 4,4'-ethylidenediphenyl dicyanate | 47073-92-7 | 10 - 30% | Yes |
| 4-nonylphenol, branched | 84852-15-3 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If not breathing, give artificial respiration. If breathing is difficult, oxygen should be administered by qualified personnel. Move to fresh air. If symptoms persist, seek medical advice.
Rinse with running water and soap. Remove contaminated clothing and shoes. If symptoms develop and persist, get medical attention. Wash contaminated clothing before reuse. Thoroughly clean shoes before reuse. Discard any shoes or clothing items that cannot be decontaminated.
Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Seek medical attention immediately.
Seek immediate medical attention. Do not induce vomiting. Never give anything by mouth to an unconscious person.
Immediate Medical Attention
Seek immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray (fog), foam, dry chemical or carbon dioxide.
Closed containers may rupture (due to build up of pressure) when exposed to extreme heat.
Keep unnecessary personnel away.
Firefighter Protection
Wear self-contained breathing apparatus and full protective clothing, such as turn-out gear.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protection recommended in Section 8, isolate the hazard area and deny entry to unnecessary and unprotected personnel.
Do not allow product to enter sewer or waterways.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Scrape up spilled material and place in a closed container for disposal.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
LOCTITE ABLESTIK 8390 known as Ablebond 8390 (34g)
---
LOCTITE ABLESTIK 8370C known as Ablebond 8370C (6.8g)
---
LOCTITE ABLESTIK 958-7 known as Ablebond 958-7 (5011) (4.5g)
---
LOCTITE ABLESTIK 976-1 known as Ablebond 976-1 (0.95g)
---
LOCTITE ABLESTIK 84-3J known as Ablebond 84-3J (454g)
---
LOCTITE ABLESTIK 84-3 known as Ablebond 84-3 (7.5g)
---
LOCTITE ABLESTIK 968-2 known as Ablebond 968-2 (1.8g)
---
LOCTITE ABLESTIK 3230 known as Ablebond 3230 (36g)
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Prevent contact with eyes, skin and clothing. Do not breathe vapor and mist. Wear suitable protective clothing, safety glasses and gloves. Keep container closed.
Store at or below -40 °C. Keep container tightly closed and in a cool, well-ventilated place. Store in a dry place. Store in original container until ready to use.
Wash thoroughly after handling. When using do not eat, drink or smoke.
Remove all sources of ignition. Keep away from heat, spark and flame.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions of storage and use.
Not available.
None under normal processing.
Keep away from heat, ignition sources and incompatible materials. Protect from direct sunlight.
Strong oxidizing agents. Strong acids and strong bases. Amines.
Oxides of carbon. Phenolics. Toxic fumes. Irritating vapors. Oxides of nitrogen. Oxides of Metals in Section 3.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- UN3082
- Shipping Name
- RQ, Environmentally hazardous substance, liquid, n.o.s.
- Transport Class
- 9
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for LOCTITE ABLESTIK JM 7000 known as Ablebond JM7000 (9g)?
The signal word is warning.
What is the physical form of LOCTITE ABLESTIK JM 7000 known as Ablebond JM7000 (9g)?
LOCTITE ABLESTIK JM 7000 known as Ablebond JM7000 (9g) is a liquid with gray / grey color. It has slight odor.
What is the solubility of LOCTITE ABLESTIK JM 7000 known as Ablebond JM7000 (9g)?
Insoluble Water
What is LOCTITE ABLESTIK JM 7000 known as Ablebond JM7000 (9g) used for?
Adhesive
What are the hazard statements for LOCTITE ABLESTIK JM 7000 known as Ablebond JM7000 (9g)?
This substance has 2 hazard statements:
- H319: CAUSES SERIOUS EYE IRRITATION.
- H361: SUSPECTED OF DAMAGING FERTILITY OR THE UNBORN CHILD.
What is the melting point of LOCTITE ABLESTIK JM 7000 known as Ablebond JM7000 (9g)?
The melting point is Not applicable, Product is a liquid and the boiling point is Not applicable, Polymerizes before boiling point is reached..