Chemical Product Identification & Regulatory Data
Official chemical identifiers, CAS numbers, and regulatory compliance information
Basic Product Information
Regulatory Identifiers
Chemical Abstracts Service registry number - unique identifier for chemical substances
Uses Information
Overview
TETRAETHYLLEAD is a liquid. substance commonly used chemical intermediate for research and industrial use only.
Manage Your Safety Data Sheets
Organize and access your chemical safety data with ease.
GHS Hazard Classification & Safety Warnings
Globally Harmonized System (GHS) hazard pictograms, signal words, and safety classifications
Classification Status
Signal Word
Hazard Classifications
GHS Hazard Pictograms & Safety Symbols
GHS06
GHS09
GHS (Globally Harmonized System) pictograms indicate specific chemical hazard categories and safety precautions
Hazard Statements
- H227: Combustible liquid
- H300: Fatal if swallowed
- H312: Harmful in contact with skin
- H335: May cause respiratory irritation
- H400: Very toxic to aquatic life
Precautionary Statements
- P210: Keep away from heat, open flames, sparks. - No smoking
- P261: Avoid breathing vapors
- P264: Wash hands thoroughly after handling
- P270: Do not eat, drink or smoke when using this product
- P271: Use only outdoors or in a well-ventilated area
- P273: Avoid release to the environment
- P280: Wear protective gloves/protective clothing/eye protection/face protection
- P301+P310: If swallowed: Immediately call a doctor
- P302+P352: If on skin: Wash with plenty of water
- P304+P340: If inhaled: Remove person to fresh air and keep comfortable for breathing
- P312: Call a doctor if you feel unwell
- P330: Rinse mouth
- P362+P364: Take off contaminated clothing and wash it before reuse
- P370+P378: In case of fire: Use water spray, foam, carbon dioxide, dry chemical to extinguish
- P391: Collect spillage
- P403+P233: Store in a well-ventilated place. Keep container tightly closed
- P403+P235: Keep in a cool place
- P405: Store locked up
- P501: Dispose of contents/container to licensed waste disposal facility.
Chemical Manufacturers & Supply Chain
Authorized suppliers, manufacturers, and distribution network information
GELEST, INC.
manufacturer
11 East Steel Road, Morrisville, PA 19067, USA
US
215-547-1015
215-547-2484
24/7 Emergency Response & Poison Control
Critical emergency contact numbers for chemical spills, exposure incidents, and medical emergencies
CHEMTREC
1-800-424-9300
US
(M-F): 8:00 AM - 5:30 PM EST
CHEMTREC
+1 703-527-3887
US
Chemical Composition & Hazardous Ingredients
Detailed component analysis, concentration ranges, and hazardous substance identification
Product Type
substanceChemical Components & Hazardous Substances
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Tetraethyllead EC: 201-075-4 | 78-00-2 | 95-100% | ⚠️ Hazardous |
Emergency First Aid Measures
Critical first aid procedures for chemical exposure incidents and medical emergencies
🫁 Inhalation Exposure
Remove victim to fresh air and keep at rest in a position comfortable for breathing. If you feel unwell, seek medical advice.
Symptoms:
May cause respiratory irritation. Volatile compounds of lead should be treated with extreme caution.
🖐️ Skin Contact
Wash with plenty of soap and water.
Symptoms:
May cause skin irritation.
👁️ Eye Contact
Immediately flush eyes thoroughly with water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical advice/attention.
Symptoms:
May cause eye irritation.
🍽️ Ingestion/Swallowing
Never give anything by mouth to an unconscious person. Get medical advice/attention.
Symptoms:
Fatal if swallowed. Swallowing a small quantity of this material will result in serious health hazard.
🚨 Immediate Medical Attention Required
Physician note: Diagnostic mobilization of lead with calcium EDTA may be useful in questionable cases.
Related Chemical Substances & Alternative Products
Similar chemicals with comparable safety profiles and industrial applications
Technical Specifications & Material Properties
Physical state, chemical properties, melting point, boiling point, and material characteristics
Exposure Controls & Personal Protective Equipment (PPE)
Occupational exposure limits, engineering controls, and required safety equipment
🏭 Engineering Controls
Handle in an enclosing hood with exhaust ventilation.
🧤 Hand Protection
Neoprene or nitrile rubber gloves.
👁️ Eye Protection
Chemical goggles. Contact lenses should not be worn.
😷 Respiratory Protection
Where exposure through inhalation may occur from use, respiratory protection equipment is recommended. NIOSH-certified full-face supplied air respirator.
🦺 Skin/Body Protection
Wear suitable protective clothing.
Transportation & Shipping Information
UN numbers, shipping names, transport classes, and regulatory transport requirements
🏷️ UN Number
1649
📦 Proper Shipping Name
Motor fuel anti-knock mixtures
⚠️ Transport Hazard Class
6.1 - Class 6.1 - Poisonous materials 49 CFR 173.132
📋 Packing Group
I - Great Danger
Chemical Safety FAQ & Common Questions
Most frequently asked questions about safety, handling, storage, and regulatory compliance
What is the hazard signal word for TETRAETHYLLEAD?
The signal word for this substance is "danger".
What is the physical form of TETRAETHYLLEAD?
TETRAETHYLLEAD is a liquid appearing as liquid. with colorless. amber hazy. color. It has no data available odor.
What is the solubility of TETRAETHYLLEAD?
Insoluble in water.
What is TETRAETHYLLEAD used for?
Chemical intermediate For research and industrial use only
What are the hazard statements for TETRAETHYLLEAD?
This substance has 5 hazard statements: H227: Combustible liquid H300: Fatal if swallowed H312: Harmful in contact with skin H335: May cause respiratory irritation H400: Very toxic to aquatic life
What is the melting point of TETRAETHYLLEAD?
The melting point is No data available and the boiling point is 84 - 85 °℃ @ 15 mm Hg.