Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Britesil C20, Britesil C24, Britesil HS240, Britesil C20-P, Britesil C24-P, Britesil H24, Britesil H20, 3Na SAT, SODIUM SILICATE 3Na
- Chemical Name
- Sodium silicate, 1,6 < molar ratio ≤ 2,6
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Detergent industry – raw material, Water- and waste water treatment – process chemical, Refractory industry – raw material
Manufacturers & Suppliers
PQ Nederland B.V.
manufacturer
Ankerkade 111, 6222 NL Maastricht
Emergency Contacts
PQ Europe, The Netherlands, Maastricht
+31 43 3525959
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Sodium silicate in powder and granular form, 1,6 < molar ratio ≤ 2,6
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Sodium silicate, 1,6 < molar ratio ≤ 2,6 EC: 215-687-4 | 1344-09-8 | 80% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air, rest, half upright position, loosen clothing. Seek medical advice if irritation develops.
Symptoms: Irritating to respiratory system.
Remove immediately all contaminated clothing. Wash immediately with plenty of water. Seek medical advice if irritation develops.
Symptoms: Irritating to skin.
Thoroughly rinse immediately with plenty of water for 15 minutes. Eyelids should be held away from the eyeball to ensure thorough rinsing. Ophthalmic treatment necessary.
Symptoms: Causes injury to the cornea and eyelids. Risk of serious damage to eyes.
Only when conscious, rinse mouth, give plenty of water to drink. Do not induce vomiting. Seek medical advice.
Medical Treatment
Ophthalmic treatment necessary.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Not combustible. Use extinguishing media appropriate to the source of the fire.
not known
Beware of the caustic aqueous solution of the product.
Firefighter Protection
Use appropriate protective equipment to the source of the fire.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter drains, surface water, groundwater and soil.
Collect the material completely in a clean container for (preferable) reuse or disposal. Sweep remaining material with a broom.
Related Products
Similar products with comparable safety profiles
Sanosil S010
---
MultiSil® ChloroSil 1.000 F
---
Sodium metasilicate, anhydrous
CAS: 6834-92-0
Sanosil S015
---
DALSORB® F50, D-SOL® D60, MAGNESOL® Cartridge Grade, MAGNESOL® Cartridge P, MAGNESOL® Haze-Out, MAGNESOL® Super Flow, MAGNESOL® HMR-LS, MAGNESOL® Polysorb 30-40, MAGNESOL® Powersorb, MAGNESORB® 1500R, MAGNESOL® MP120
---
SODIUM SULFITE, REAGENT, ACS
CAS: 7757-83-7
Advancal, AnnaSicon 24, AnnaSicon 25, CN 137, CN 159, REFRAX® ARC, REFRAX® Basic, REFRAX® Pro, REFRAX® Plus, REFRAX® SBF, Sicanit Al3, N-SiC 2165, N-SiC 2172
---
Sodium Silicate, ~37%
---
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin, eyes and clothing. Avoid dust generation. The usual precautionary measures for handling chemicals should be observed.
The product is hygroscopic and may form lumps. Store in a dry and cool place. Keep the original package or container closed if not in use.
The usual precautionary measures for handling chemicals should be observed.
No specific recommendations.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Working areas and methods should be organized in such a way that direct contact is avoided. Avoid dust generation. Areas in which handling generates dust should have adequate ventilation equipment to minimize exposure to personnel.
Wear chemical or alkali resistant protective gloves (according to EN 374, cat. III).
Wear basket eye glasses or a face protection shield.
In case of dust formation use suitable respiratory equipment. (respirator with filter P2).
Wear suitable protective clothing.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
The product is stable under recommended storage and handling conditions (see section 7).
The product reacts with aluminum and other light metals and their alloys, tin and zinc to generate hydrogen which can form explosive mixtures with air. The product sticks to and may etch glass surfaces. Acids decomposes the product and silicic acid precipitates. Reacts with acids with formation of heat.
The product reacts with aluminum and other light metals and their alloys, tin and zinc to generate hydrogen which can form explosive mixtures with air. The product sticks to and may etch glass surfaces. Acids decomposes the product and silicic acid precipitates. Reacts with acids with formation of heat.
Avoid contact with humidity and Carbon dioxide.
aluminum and other light metals and their alloys, tin and zinc, glass surfaces, Acids
Corrosive sodium oxide vapours may be generated at high temperatures.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Disposal in accordance with EC directive 91/692/EEC.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- Shipping Name
- not relevant
- Packing Group
- not relevant
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Labeling according to EC directives: EC-number See section 2. Classification based on tests. Symbol(s): Irritant. R-phrases: R 37/38, R 41. S-phrases: S 22, S 26, S 36/37/39.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Britesil C20, Britesil C24, Britesil HS240, Britesil C20-P, Britesil C24-P, Britesil H24, Britesil H20, 3Na SAT, SODIUM SILICATE 3Na?
The signal word is no signal word.
What is the physical form of Britesil C20, Britesil C24, Britesil HS240, Britesil C20-P, Britesil C24-P, Britesil H24, Britesil H20, 3Na SAT, SODIUM SILICATE 3Na?
Britesil C20, Britesil C24, Britesil HS240, Britesil C20-P, Britesil C24-P, Britesil H24, Britesil H20, 3Na SAT, SODIUM SILICATE 3Na is a fine, hygroscopic granules appearing as fine, hygroscopic granules (mean particle size: 80 –900 micrometer) with white color. It has odourless odor.
What is Britesil C20, Britesil C24, Britesil HS240, Britesil C20-P, Britesil C24-P, Britesil H24, Britesil H20, 3Na SAT, SODIUM SILICATE 3Na used for?
Detergent industry – raw material, Water- and waste water treatment – process chemical, Refractory industry – raw material
What are the hazard statements for Britesil C20, Britesil C24, Britesil HS240, Britesil C20-P, Britesil C24-P, Britesil H24, Britesil H20, 3Na SAT, SODIUM SILICATE 3Na?
This substance has 2 hazard statements:
- Risk of serious damage to eyes.
- Irritating to respiratory system and skin.
What is the melting point of Britesil C20, Britesil C24, Britesil HS240, Britesil C20-P, Britesil C24-P, Britesil H24, Britesil H20, 3Na SAT, SODIUM SILICATE 3Na?
The melting point is not determined and the boiling point is not applicable.