NextSDS Logo
Safety Data Sheet EN

FennoSize KD 564M

Scan your chemical compliance

Free 10-second scan. Upload a document and check compliance instantly.

Scan Now
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
FennoSize KD 564M

Regulatory Identifiers

CAS Number
N/A

Identified Uses

Hydrophobation of paper and board,

Uses advised against

Do not use for other purposes than the identified uses.

Manufacturers & Suppliers

K

Kemira Oyj

Energiakatu 4 00180 HELSINKI

+358108611

Emergency Contacts

Carechem 24 International

+44 (0) 1235 239 670

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

Hazard Classifications

Not Classified

GHS Pictograms

Manage your Safety Data Sheets

Organize and access chemical safety data with ease

Manage SDS
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Alkylketendimer wax, aqueous dispersion.

Chemical Name CAS Number Concentration Hazardous
2-Oxetanone, 3-C14-16-alkyl 4-C15-17-alkylidene derivs. EC: 308-760-8 98246-87-8 10 - 20% Yes
mixture of: 5-chloro-2-methyl-4-isothiazolin-3-one [EC no. 247-500-7] and 2-methyl-4-isothiazolin-3-one [EC no. 220-239-6] (3:1) 55965-84-9 15% Yes

For explanation of abbreviations see section 16.

04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air.

Skin contact

Wash off with soap and water. Wash contaminated clothing before reuse. If symptoms persist, call a physician.

Eye contact

Rinse immediately with plenty of water, also under the eyelids, for at least 15 minutes. Obtain medical attention.

Ingestion

Rinse mouth. Drink water as a precaution. Do not induce vomiting without medical advice. Consult a physician.

Immediate Medical Attention

Obtain medical attention (for eye contact). If symptoms persist (for skin contact), call a physician. Consult a physician (for ingestion).

Medical Treatment

Symptomatic treatment.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Water mist Carbon dioxide (CO2) Foam Dry powder

Unsuitable media

High volume water jet

Specific hazards

Cool closed containers exposed to fire with water spray.

Instructions

Cool closed containers exposed to fire with water spray. Standard procedure for chemical fires.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus. Splashproof protective suit.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Avoid contact with skin and eyes. Sweep up to prevent slipping hazard. For personal protection see section 8.

Environmental

Should not be released into the environment.

Cleanup methods

Sweep up and shovel into suitable containers for disposal.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Keep container tightly closed. Avoid contact with skin, eyes and clothing. Ensure adequate ventilation.

Storage

Store in cool place. Do not freeze. Dispersion decomposes. Ensure adequate ventilation. Keep container tightly closed. Recommended storage temperature for quality reasons.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Ensure adequate ventilation.

Hands

Material : Nitrile rubber Directive : Protective gloves complying with EN 374. Remarks : Please observe the instructions regarding permeability and breakthrough time which are provided by the supplier of the gloves. Also take into consideration the specific local conditions under which the product is used, such as the danger of cuts, abrasion, and the contact time.

Eyes

Safety glasses with side-shields conforming to EN166

Respiratory

In case of inadequate ventilation wear respiratory protection. Respirator with A-P2 filter.

Skin/Body

Splashproof protective suit.

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
liquid
Physical State Data
liquid
State Under Standard Conditions
---
Appearance
---
Colour
white
Colour Intensity
---
Form
---
Odor
very faint
Odor Threshold
not determined
Ph
2,5 - 4,2
Melting Point
ca. 0 °C
Boiling Point
> 100 °C
Flash Point
---
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
similar to water
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
ca. 1 000 kg/m³
Flammability
The product is not flammable.
Upper Explosive Limit
No information available.
Lower Explosive Limit
---
Explosive Limits
---
Auto Ignition Temperature
---
Decomposition Temperature
> 100 °C
Solubility
---
Partition Coefficient
---
Solubility In Water
completely miscible
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
< 100 mPa.s
Kinematic Viscosity
---
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

Stable under recommended storage conditions.

Reactivity

No data available

Hazardous reactions

Hazardous polymerisation does not occur.

Avoid

Do not freeze.

Incompatible

No data available

Decomposition

Ammonia Carbon oxides Nitrogen oxides (NOx)

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for FennoSize KD 564M?

The signal word is no signal word.

What is the physical form of FennoSize KD 564M?

FennoSize KD 564M is a liquid with white color. It has very faint odor.

What is FennoSize KD 564M used for?

Hydrophobation of paper and board,

What is the melting point of FennoSize KD 564M?

The melting point is ca. 0 °C and the boiling point is > 100 °C.

Compliance Scanner

Scan your compliance