TUNAIR 100 20I D-GB-F-I-E-PL Kompres.öl

Remove person to fresh air and keep comfortable for breathing. In all cases of doubt, or when symptoms persist, seek medical advice.

Wash with plenty of water and soap. Take off immediately all contaminated clothing and wash it before reuse. In all cases of doubt, or when symptoms persist, seek medical advice.

Symptoms: skin irritation

Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. In case of troubles or persistent symptoms, consult an ophthalmologist.

Do NOT induce vomiting. Observe risk of aspiration if vomiting occurs. Call a physician in any case!

Water fog. Foam. Carbon dioxide (CO2). Extinguishing powder.

High power water jet.

Incomplete combustion and thermolysis gases of different toxicity can occur. In the case of hydrocarbonaceous products such as CO, CO2, aldehydes and soot. These can be very dangerous if they are inhaled in high concentrations or in enclosed spaces.

In case of fire and/or explosion do not breathe fumes. Move undamaged containers from immediate hazard area if it can be done safely.

Ensure all waste water is collected and treated via a waste water treatment plant.

Clean contaminated articles and floor according to the environmental legislation.

Materials: liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents)

Observe instructions for use. When using do not eat, drink, smoke, sniff. Wear personal protection equipment (refer to section 8). Avoid contact with skin and eyes.

Keep container tightly closed. Store in a cool dry place. Observe legal regulations and provisions.

When using do not eat, drink, smoke, sniff.

Keep away from sources of ignition - No smoking.

If handled uncovered, arrangements with local exhaust ventilation have to be used.

Protect skin by using skin protective cream. When handling with chemical substances, protective gloves must be worn with the CE-label including the four control digits. The quality of the protective gloves resistant to chemicals must be chosen as a function of the specific working place concentration and quantity of hazardous substances. Suitable material: NBR (Nitrile rubber) Breakthrough time (maximum wearing time) 480min Thickness of the glove material 0,45 mm DIN EN 374

Suitable eye protection: Tightly sealed safety glasses. DIN EN 166

Wear breathing apparatus if exposed to vapours/dusts/aerosols. When exceeding the relevant workplace exposure limits, note the following: - Suitable respiratory protective equipment: Combination filter device (DIN EN 141). - Filtering device with filter or ventilator filtering device of type: A - Observe the wear time limits as specified by the manufacturer. - Observe legal regulations and provisions.

Wear suitable protective clothing. Take off immediately all contaminated clothing and wash it before reuse.

Observe legal regulations and provisions.

The product is stable under normal conditions.

Reacts with : Oxidizing agents.

No hazardous reaction when handled and stored according to provisions.

Keep away from heat/sparks/open flames/hot surfaces. - No smoking. Take precautionary measures against static discharges.

Oxidizing agents. Pyrophoric or self-heating substances.

Incomplete combustion and thermolysis gases of different toxicity can occur. In the case of hydrocarbonaceous products such as CO, CO2, aldehydes and soot. These can be very dangerous if they are inhaled in high concentrations or in enclosed spaces.