Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- ROLFOR TR/8/L
- Product Code
- F004625
- Chemical Name
- Ethoxylated fatty alcohol
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Lamberti S.p.A.
manufacturer
Via Piave, 18 - 21041 Albizzate (VA) - Italia
+39 0331 715111
Lamberti S.p.A.
manufacturer
+39 0331 715 111
Emergency Contacts
Lamberti S.p.A.
+39 0331 715 111
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS05
GHS07
Hazard Statements
Precautionary Statements
Still copying SDS data manually?Free
You don't have to. NextSDS reads this SDS and adds the information to your library automatically.
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Chemical description: Ethoxylated fatty alcohol.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Ethoxylated fatty alcohol. | 78330-21-9 | --- | No |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove casualty to fresh air and keep warm and at rest.
Areas of the body that have - or are only even suspected of having - come into contact with the product must be rinsed immediately with plenty of running water and possibly with soap. Remove contaminated clothing immediately and dispose of safely.
After contact with the eyes, rinse with water with the eyelids open for a sufficient length of time, then consult an opthalmologist immediately. Protect uninjured eye.
Do not under any circumstances induce vomiting. Seek immediately medical advice.
Immediate Medical Attention
Seek immediately medical advice.
Medical Treatment
Not known.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water. Carbon dioxide (CO2).
Not known.
Do not inhale explosion and combustion gases.
Move undamaged containers from immediate hazard area if it can be done safely.
Firefighter Protection
Use suitable breathing apparatus .
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons to safety.
Do not allow to enter into soil/subsoil. Do not allow to enter into surface water or drains. Retain contaminated washing water and dispose it.
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Avoid contact with skin and eyes, inhalation of vapours and mists. Do not use empty container before they have been cleaned. Before making transfer operations, assure that there are not any incompatible material residuals in the containers.
Keep away from food, drink and feed. Adequate ventilation in working area.
Contamined clothing should be changed before entering eating areas. Do not eat or drink while working.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Chemical-resistant, impervious protective gloves (EN 374). When prolonged or frequently repeated contact may occur, a glove is recommended to prevent contact. Examples of preferred glove barrier materials include: Neoprene. Nitrile/butadiene rubber ("nitrile" or "NBR"). Polyvinyl chloride ("PVC" or "vinyl"). As general indication we suggest as suitable materials for short-term contact or splashes (recommended: at least protection index 2, corresponding to > 30 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.4 mm thickness) and suitable materials for longer, direct contact (recommended: protection index 6, corresponding to > 480 minutes permeation time as per EN 374): nitrile rubber (NBR; >= 0.7 mm thickness). This information is based on literature references and on information provided by glove manufacturers, or is derived by analogy with similar substances-mixtures.
Use close fitting safety goggles. (ref. EN 166, EN 140, EN175).
Use adequate protective respiratory equipment. (ref. EN 136, EN 140, EN 141, EN 143, EN 149, EN 405).
Use clothing that provides comprehensive protection to the skin, e.g. cotton, rubber, PVC or viton. (ref. EN 340).
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions
Stable under normal conditions
Stable under normal conditions
Strong oxidizers
Not known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for ROLFOR TR/8/L?
The signal word is danger.
What is the physical form of ROLFOR TR/8/L?
ROLFOR TR/8/L is a liquid appearing as liquid (25°c) . It has slight. odor.
What are the hazard statements for ROLFOR TR/8/L?
This substance has 2 hazard statements:
- H302: Harmful if swallowed.
- H318: Causes serious eye damage.
What is the melting point of ROLFOR TR/8/L?
The melting point is N.D. and the boiling point is > 150 °C.