Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- 7-11 RADIANT
- Product Code
- 02140006
Regulatory Identifiers
- CAS Number
- N/A
- UFI Code
- G2R5-N59J-260U-HMEG
Identified Uses
Sector of Use: SU3 Industrial uses, SU22 Professional uses; Product category: PC35 Washing and cleaning products; Process category: PROC10 Roller application or brushing, PROC19 Manual activities involving hand contact; Environmental release category: ERC8a Widespread use of non-reactive processing aid; Application of the substance / the mixture: Scouring agent/ Cleaning agent
Uses advised against
No further relevant information available.
Manufacturers & Suppliers
ZEP UK Ltd
manufacturer
Tanhouse Lane, Widnes Cheshire, WA8 0RD, United Kingdom
+44 (0)151 422 1000
http://www.zep.co.uk
ZEP Industries BV
manufacturer
Vierlinghweg 30, 4612 PN Bergen op Zoom, The Netherlands
+31 164 250 100
ZEP Industries BV
manufacturer
Vierlinghweg 30, 4612 PN Bergen op Zoom, The Netherlands
+32 2 347 0117
ZEP ITALIA SRL
manufacturer
Piazzale Luigi Cadorna, 2 - Milano - (MI) 20123 Milano (MI) - Italy; Via Nettunense Km. 25.000 04011 Aprilia (LT) - Italy
+39.06.926691
http://www.zep.it
Emergency Contacts
NHS
+44 0845 46 47
NHS
+44 08454 24 24 24
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Mixture of substances listed below with nonhazardous additions.
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Amides, C8-18 (even numbered) and C18-unsatd., N, N-bis(hydroxyethyl) EC: 931-329-6 | --- | 5 - 10% | Yes |
| 1,2,3-Propanetricarboxylic acid, 2-hydroxy-, monohydrate EC: 611-842-9 | 5949-29-1 | 1 - 2.5% | Yes |
| sodium hydroxide EC: 215-185-5 | 1310-73-2 | 0.5 - 1% | Yes |
| ammonia EC: 215-647-6 | 1336-21-6 | 0.25 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Supply fresh air; consult doctor in case of complaints.
Immediately wash with water and soap and rinse thoroughly. If skin irritation continues, consult a doctor.
Rinse opened eye for several minutes under running water. Then consult a doctor.
If symptoms persist consult doctor.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use fire extinguishing methods suitable to surrounding conditions.
No further relevant information available.
Firefighter Protection
Wear self-contained respiratory protective device. Do not inhale explosion gases or combustion gases. Wear fully protective suit.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Remove persons from danger area.
Inform respective authorities in case of seepage into water course or sewage system. Keep contaminated washing water and dispose of appropriately.
Absorb with liquid-binding material
Materials: sand, diatomite, universal binders
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Store in cool, dry place in tightly closed receptacles.
Store in cool, dry place in tightly closed receptacles.
No special measures required.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Preventive skin protection by use of skin-protecting agents is recommended. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer. As the product is a preparation of several substances, the resistance of the glove material can not be calculated in advance and has therefore to be checked prior to the application. The exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. The determined penetration times according to EN 16523-1:2015 are not performed under practical conditions. Therefore a maximum wearing time, which corresponds to 50% of the penetration time, is recommended. Not suitable are gloves made of the following materials: Strong material gloves
Goggles recommended during refilling
Preventive skin protection by use of skin-protecting agents is recommended.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if used according to specifications.
No further relevant information available.
No dangerous reactions known.
No decomposition if used according to specifications.
No further relevant information available.
No dangerous decomposition products known.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for 7-11 RADIANT?
The signal word is no signal word.
What is the physical form of 7-11 RADIANT?
7-11 RADIANT is a liquid with light green color. It has characteristic odor.
What is 7-11 RADIANT used for?
Sector of Use: SU3 Industrial uses, SU22 Professional uses; Product category: PC35 Washing and cleaning products; Process category: PROC10 Roller application or brushing, PROC19 Manual activities involving hand contact; Environmental release category: ERC8a Widespread use of non-reactive processing aid; Application of the substance / the mixture: Scouring agent/ Cleaning agent
What are the hazard statements for 7-11 RADIANT?
This substance has 1 hazard statement:
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of 7-11 RADIANT?
The melting point is Undetermined. and the boiling point is >103 °C.