Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- INDUCARE DRY CLEAN
Regulatory Identifiers
- CAS Number
- N/A
- REACH No.
- Not applicable (mixture)
Identified Uses
Detergent according to Regulation (EC) No 648/2004
Uses advised against
No uses advised against known
Manufacturers & Suppliers
Novatio
national supplier
Industrielaan 5B, B-2250 Olen
+32 14 25 76 40
Novatech International N.V.
manufacturer
Industrielaan 5B, B-2250 Olen
+32 14 85 97 37
Emergency Contacts
BIG
+32 14 58 45 45
24h/24h
EN, FR, DE, NL
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| ethanol EC: 200-578-6 | 64-17-5 | 5% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove the victim into fresh air. Respiratory problems: consult a doctor/medical service.
Symptoms: No effects known.
Rinse with water. Take victim to a doctor if irritation persists.
Symptoms: No effects known.
Rinse with water. Take victim to an ophthalmologist if irritation persists.
Symptoms: No effects known.
Rinse mouth with water. Consult a doctor/medical service if you feel unwell.
Symptoms: No effects known.
Immediate Medical Attention
If applicable and available it will be listed below.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Water spray. Polyvalent foam. Dry chemical powder. Carbon dioxide.
No unsuitable extinguishing media known.
Upon combustion CO and CO2 are formed (carbon monoxide - carbon dioxide).
No specific fire-fighting instructions required.
Firefighter Protection
Gloves. Protective clothing. Heat/fire exposure: compressed air/oxygen apparatus.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Contain released product.
Take up liquid spill into absorbent material. Scoop absorbed substance into closing containers. Clean contaminated surfaces with an excess of water. Wash clothing and equipment after handling.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from naked flames/heat. Observe normal hygiene standards. Keep container tightly closed.
Storage temperature: <50 °C. Keep container in a well-ventilated place. Protect against frost. Keep out of direct sunlight. Meet the legal requirements.
Observe normal hygiene standards.
Keep away from naked flames/heat.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Keep away from naked flames/heat. Measure the concentration in the air regularly. Carry operations in the open/under local exhaust/ventilation or with respiratory protection.
Gloves. Materials: viton, Breakthrough time: >480 minutes, Thickness: 0.35 mm. - materials (good resistance) Viton.
Eye protection not required in normal conditions.
Wear gas mask with filter type A if conc. in air > exposure limit.
See headings 6.2, 6.3 and 13
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under normal conditions.
Substance has neutral reaction.
No data available.
Keep away from naked flames/heat.
Oxidizing agents, reducing agents, (strong) acids, (strong) bases.
Upon combustion CO and CO₂ are formed (carbon monoxide - carbon dioxide).
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Treat using the best available techniques before discharge into drains or the aquatic environment.
Remove waste in accordance with local and/or national regulations.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
No chemical safety assessment is required for the mixture, but a chemical safety assessment has been performed for ethanol.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for INDUCARE DRY CLEAN?
The signal word is no signal word.
What is the physical form of INDUCARE DRY CLEAN?
INDUCARE DRY CLEAN is a liquid with no data available on colour color. It has characteristic odour odor.
What is INDUCARE DRY CLEAN used for?
Detergent according to Regulation (EC) No 648/2004
What is the melting point of INDUCARE DRY CLEAN?
The melting point is 0 °C and the boiling point is 78 °C.