Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- INDUCRYL AW BLACK
- Product Form
- Mixture
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
SU22 Professional uses, SU3 Industrial uses, PROC7 Industrial spraying, PC9a Coatings and paints, thinners, paintremovers, PROC10 Roller application or brushing, PROC11 Non industrial spraying
Uses advised against
No additional information available
Manufacturers & Suppliers
Rewah
manufacturer
Nijverheidsweg 24, B-2240 Zandhoven - Belgique-België
+32 (0)3 4751414
Emergency Contacts
Emergency Contact
+32 (0)70 245 245
Centre Anti-Poisons/Antigifcentrum c/o Hôpital Central de la Base - Reine Astrid
+32 70 245 245
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
GHS08
Hazard Statements
Precautionary Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| Hydrocarbons, C9-C12, n-Alkanes, Isoalkanes, Cyclics, Aromatics (5-25%) / Naphtha (petroleum), hydrodesulfurized heavy (benzene< 0,1 %) EC: 919-446-0 | --- | 5 - 25% | Yes |
| Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, <2% aromatics EC: 919-857-5 | 64742-48-9 | 5 - 25% | Yes |
| 2-methoxy-1-methylethyl acetate EC: 203-603-9 | 108-65-6 | 1 - 5% | Yes |
| 2-butanone oxime; ethyl methyl ketoxime; ethyl methyl ketone oxime EC: 202-496-6 | 96-29-7 | 0.1 - 1% | Yes |
| Paratertiarybutylphenol EC: 202-679-0 | 98-54-4 | 0.1 - 1% | Yes |
| cobalt bis(2-ethylhexanoate) EC: 205-250-6 | 136-52-7 | 0.1 - 1% | Yes |
| hexanoic acid, 2-ethyl-, zirconium salt EC: 245-018-1 | 22464-99-9 | 0.1 - 1% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
If experiencing respiratory symptoms: Remove person to fresh air and keep comfortable for breathing. Call a poison center or a doctor if you feel unwell.
Symptoms: drowsiness or dizziness
Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse.
Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persists.
Symptoms: pain, blinking or redness
Immediately call a POISON CENTER/doctor. Do NOT induce vomiting.
Symptoms: May be fatal if swallowed and enters airways.
Immediate Medical Attention
Immediately call a POISON CENTER/doctor.
Medical Treatment
May result in aspiration into the lungs, causing chemical pneumonia.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Foam. Dry powder. Carbon dioxide. Water spray. Sand.
Do not use a heavy water stream.
Flammable liquid and vapour. Flammable liquid. and on exposure to temperature rise: pressure rise and possible bursting of container.
Avoid (reject) fire-fighting water to enter environment. Use water spray or fog for cooling exposed containers.
Firefighter Protection
Do not enter fire area without proper protective equipment, including respiratory protection. All fire-fighting personnel must wear safety suits.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Avoid release to the environment.
Clean up any spills as soon as possible, using an absorbent material to collect it.
Materials: absorbent material
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Handle empty containers with care because residual vapours are flammable. Collect spilled polymer: It could cause falls (Danger of slipping). Use only non-sparking tools. Do not breathe vapours.
Keep container tightly closed. Handling and storage. National regulations.
Do not eat, drink or smoke when using this product.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Provide local exhaust or general room ventilation to minimize vapour concentrations.
Wear suitable gloves resistant to chemical penetration. EN 374. Recommendation. Nitrile rubber gloves. 6 (> 480 minutes)
Chemical goggles or safety glasses
Where exposure through inhalation may occur from use, respiratory protection equipment is recommended. [In case of inadequate ventilation] wear respiratory protection. Half mask with gas filter Type A filter material. CEN standards EN 136, 140 and 405 provide breathing masks and EN 149 and 143 provide recommendations to use filters.
Long sleeved protective clothing
Do not flush into surface water or sewer system.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Flammable liquid and vapour. May form flammable/explosive vapour-air mixture. Stable under normal conditions.
Refer to Section 10.5 on Incompatible Materials.
Refer to Section 10.5 on Incompatible Materials.
Open flame. Overheating. Direct sunlight. Heat. Sparks.
Keep away from oxidizers, strong acids and strong bases.
May release flammable gases. Stable under normal conditions.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Forbidden through garbage can or sewerage, follow the next guidelines: 75/442/EG & 91/689/EG.
Forbidden through garbage can or sewerage, follow the next guidelines: 75/442/EG & 91/689/EG.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- Not applicable
- Shipping Name
- Not applicable
- Transport Class
- Not applicable
- Packing Group
- Not applicable
Regulatory Information
Chemical regulations, safety assessments, and compliance status
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for INDUCRYL AW BLACK?
The signal word is danger.
What is the physical form of INDUCRYL AW BLACK?
INDUCRYL AW BLACK is a liquid with color according to color choice. color. It has characteristic. odor.
What is the solubility of INDUCRYL AW BLACK?
Material nearly insoluble in water.
What is INDUCRYL AW BLACK used for?
SU22 Professional uses, SU3 Industrial uses, PROC7 Industrial spraying, PC9a Coatings and paints, thinners, paintremovers, PROC10 Roller application or brushing, PROC11 Non industrial spraying
What are the hazard statements for INDUCRYL AW BLACK?
This substance has 4 hazard statements:
- H226: Flammable liquid and vapour.
- H336: May cause drowsiness or dizziness.
- H372: Causes damage to organs (central nervous system) through prolonged or repeated exposure (if inhaled, in contact with skin).
- H412: Harmful to aquatic life with long lasting effects.
What is the melting point of INDUCRYL AW BLACK?
The melting point is No data available and the boiling point is 135 - 220 °C.