Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- METRYL PU CLEANER
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Brenntag GmbH
national supplier
Stinnes-Platz 1, DE 45472 Muelheim
Emergency Contacts
Brenntag GmbH
+49 (0)208-7828-0
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Preparation consisting of the following components:
First Aid Measures
Emergency procedures for chemical exposure incidents
Move to fresh air. If symptoms persist, call a physician.
Wash off immediately with soap and plenty of water. If skin irritation persists, call a physician.
Rinse thoroughly with plenty of water, also under the eyelids. If symptoms persist, call a physician.
Clean mouth with water and drink afterwards plenty of water. Do NOT induce vomiting. Call a physician immediately.
Immediate Medical Attention
Call a physician immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Use water spray, alcohol-resistant foam, dry chemical or carbon dioxide.
High volume water jet
Vapours may form explosive mixtures with air.
Firefighter Protection
In the event of fire, wear self-contained breathing apparatus. Wear appropriate body protection (full protective suit)
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Use personal protective equipment. Provide adequate ventilation. Keep away from heat and sources of ignition. Avoid contact with skin and eyes. Do not inhale gas/smoke/vapour/aerosol.
Do not flush into surface water or sanitary sewer system. Avoid subsoil penetration. If the product contaminates rivers and lakes or drains inform respective authorities.
Absorb with liquid-binding material. Flush away traces with water.
Materials: sand, diatomite, acid binders, universal binders
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep container tightly closed. Provide sufficient air exchange and/or exhaust in work rooms.
Keep in a dry, cool and well-ventilated place. Keep only in the original container. Keep in an area equipped with solvent resistant flooring.
Combustible Liquid. Keep away from sources of ignition - No smoking.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Refer to protective measures listed in sections 7 and 8.
Protective gloves; As the product is a preparation of several substances, the durability of the glove materials cannot be calculated in advance and has to be tested before use. Protective gloves should be replaced at first signs of wear.
Tightly fitting safety goggles
In case of insufficient ventilation wear suitable respiratory equipment. Filter type A for gases and organic vapors.
Protective work clothing
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
No decomposition if stored and applied as directed.
To avoid thermal decomposition, do not overheat.
Strong oxidizing agents; Acids
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
Can be disposed of as a solid waste or burned in a suitable installation subject to local regulations.
Disposal together with normal waste is not allowed. Do not let product enter drains.
Waste Codes
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The product does not need to be labelled in accordance with EC directives or respective national laws.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for METRYL PU CLEANER?
The signal word is no signal word.
What is the physical form of METRYL PU CLEANER?
METRYL PU CLEANER is a liquid appearing as liquid, colourless with colourless color. It has sweet odor.
What is the solubility of METRYL PU CLEANER?
partly miscible