NextSDS Logo
Safety Data Sheet EN

TOLUENE

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report.

Get Free Audit
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
TOLUENE
Chemical Name
TOLUENE

Regulatory Identifiers

CAS Number
N/A
02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified no signal word

GHS Pictograms

Get a free compliance audit

Upload your SDS inventory and get a detailed compliance report

Free Audit
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture
Chemical Name CAS Number Concentration Hazardous
TOLUENE EC: 203-625-9 108-88-3 35 - 37.5% Yes
ISOBUTYL ALCOHOL EC: 201-148-0 78-83-1 35 - 37.5% Yes
1-METHOXY-2-PROPANOL EC: 203-539-1 107-98-2 5 - 6% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Remove to open air. If breathing is irregular, seek medical advice.

Skin contact

Wash immediately with plenty of water. Remove contaminated clothing. If irritation persists, seek medical attention. Wash contaminated clothing before using them again.

Eye contact

Irrigate copiously with clean, fresh water for at least 15 minutes. Seek medical advice.

Ingestion

Obtain immediate medical attention. Induce vomiting only if indicated by the doctor. Never give anything by mouth to an unconscious person.

Immediate Medical Attention

Obtain immediate medical attention (for ingestion). Seek medical advice (for eyes, skin, inhalation).

Medical Treatment

Follow doctor's orders.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

The extinction equipment should contain carbon dioxide, foam or chemical powders. For product leaks and spills that have not caught fire, nebulised water can be used to dispel flammable fumes and protect the individuals taking part in stemming the leak.

Unsuitable media

Do not use jets of water. Water is not effective for putting out fires but can be used to cool containers exposed to flames to prevent explosions.

Specific hazards

Excess pressure may form in containers exposed to fire at a risk of explosion.

Instructions

Use jets of water to cool the containers to prevent product decomposition and the development of substances potentially hazardous for health.

Firefighter Protection

Always wear full fire prevention gear.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Eliminate sources of ignition (cigarettes, flames, sparks, etc.) from the air in which the leak occurred. If there are no contraindications, spray solid products with water to prevent the formation of dust. Use breathing equipment if fumes or powders are released into the air. Block the leakage if there is no hazard. Do not handle damaged containers or leaked product before donning appropriate protective gear. Send away individuals who are not suitably equipped.

Environmental

The product must not penetrate the sewers, surface water, ground water and neighbouring areas.

Cleanup methods

Collect the majority of the remaining material and deposit in containers for disposal. If there are no contraindications, use jets of water to eliminate product residues.

Related Products

Similar products with comparable safety profiles

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Avoid the accumulation of electrostatic charges. Keep far away from sources of heat, sparks and bright flames. Do not smoke, use matches or lighters. Keep the containers earthed while decanting and wear antistatic boots. Never use compressed air during movement.

Storage

Store the containers sealed and in a well ventilated place.

Hygiene

Do not smoke, use matches or lighters.

Fire prevention

Avoid the accumulation of electrostatic charges. Keep far away from sources of heat, sparks and bright flames. Keep the containers earthed while decanting and wear antistatic boots. Never use compressed air during movement.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

As the use of adequate technical equipment must always take priority over personal protection equipment, make sure that the workplace is well aired through effective local aspiration or bad air vent. The product must be used in a closed cycle, in well-aired environments fitted with strong localised aspiration systems (capture speed > 1.5 m/s).

Hands

Protect hands with category II (ref. Directive 89/686/EEC and standard EN 374) work gloves, such as those in PVC, neoprene, nitryl or equivalent. The following should be considered when choosing work glove material: degradation, breakage times and permeation. Work glove resistance to preparations should be checked before use, as it can be unpredictable. Gloves' limit depends on the duration of exposure.

Eyes

Wear hood visor or protective visor together with airtight goggles (ref. standard EN 166).

Respiratory

If the threshold value for one or more of the substances present in the preparation for daily exposure in the workplace or to a fraction established by the company's prevention and protection service is exceeded, wear a mask with an AX or universal filter, the class (1, 2 or 3) of which must be chosen according to the limit concentration of use (ref. standard EN 141). The use of breathing protection equipment, such as masks with organic vapour and dust/mist cartridges, is necessary in the absence of technical measures limiting worker exposure. If the substance in question is odourless or its olfactory threshold is higher than the relative exposure limit and in the event of an emergency, or when exposure levels are unknown or the concentration of oxygen in the workplace is less than 17% volume, wear self-contained, open-circuit compressed air breathing apparatus (ref. standard EN 137) or fresh air hose breathing apparatus for use with full face mask, half mask or mouthpiece (ref. standard EN 138).

Skin/Body

Wear category II professional long-sleeved overalls and safety footwear (ref. Directive 89/686/CEE and standard EN 344).

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Dynamic Viscosity
15.000 - 45.0000 m.Pa.s a 25°C
Voc Content
75,00 %
Physical State Data
liquid
Evaporation Rate
ND
Flash Point
< 21 °C
Form
---
Auto Ignition Temperature
Not available.
Kinematic Viscosity
---
Relative Density
---
Relative Evaporation Rate
---
Metal Corrosion
---
Properties Status
---
Freezing Point
<5°C
Melting Point
Not available.
Decomposition Temperature
Not available.
Physical State
viscous liquid
Vapor Pressure
Not available.
Density
---
Odor
characteristic of solvent
Solubility In Water
---
Colour Intensity
---
Cloud Point
---
Ph
Not available.
Solidification Point
---
Solubility
insoluble in water, coagulation of solid content
Solubility In Fat
miscible with different organic solvents
Upper Explosive Limit
Not available.
State Under Standard Conditions
---
Boiling Point
Not available.
Colour
transparent, slightly yellow
Vapor Density
ND
Partition Coefficient
ND
Bulk Density
---
Crystallisation Point
---
Flammability
Not available.
Explosive Limits
---
Softening Point
---
Lower Explosive Limit
Not available.
Molecular Weight
---
Appearance
viscous liquid
Odor Threshold
Not available.
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

The product is stable in normal conditions of use and storage.

Reactivity

There are no particular risks of reaction with other substances in normal conditions of use. TOLUENE: breaks down in sunlight. 1-METHOXY-2-PROPANOL: absorbs and dissolves in water and in organic solvents, dissolves various plastic materials; it is stable but with air it may slowly form explosive peroxides.

Hazardous reactions

The vapours may also form explosive mixtures with the air. TOLUENE: risk of explosion on contact with fuming sulphuric acid, nitric acid, silver perchlorates, nitrogen dioxide, non-metal halogenides, acetic acid, organic nitrocompounds. Can form explosive mixtures with the air. May react dangerously with: strong oxidising agents, strong acids, sulphur (in the presence of heat). 1-METHOXY-2-PROPANOL: can react dangerously with strong oxidising agents and strong acids.

Avoid

Avoid overheating, electrostatic discharge and all sources of ignition. 1-METHOXY-2-PROPANOL: avoid exposure to the air.

Incompatible

1-METHOXY-2-PROPANOL: oxidising agents, strong acids and alkaline metals.

Decomposition

In the event of thermal decomposition or fire, vapours potentially dangerous to health may be released.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

The data for this section has not been processed yet.

13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

The data for this section has not been processed yet.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
1866
Shipping Name
RESIN SOLUTION
Transport Class
3
Packing Group
II
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

The data for this section has not been processed yet.

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for TOLUENE?

The signal word is no signal word.

What is the physical form of TOLUENE?

TOLUENE is a viscous liquid appearing as viscous liquid with transparent, slightly yellow color. It has characteristic of solvent odor.

What is the solubility of TOLUENE?

insoluble in water, coagulation of solid content

What is the melting point of TOLUENE?

The melting point is Not available. and the boiling point is Not available..