Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Plextol R 803
Regulatory Identifiers
- CAS Number
- N/A
Identified Uses
Raw material Industrial use
Manufacturers & Suppliers
Synthomer (UK) Limited
manufacturer
South Marsh Road, Stallingborough, DN41 8DB
+441469573361
Emergency Contacts
Emergency Contact
01235 239670
NCEC
+44 1865 407333
EN
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
Polymer aqueous dispersion
| Chemical Name | CAS Number | Concentration | Hazardous |
|---|---|---|---|
| 3(2H)-Isothiazolone,5-chloro-2- methyl-, mixt. with 2-methyl- 3(2H)-isothiazolone (3:1) | 55965-84-9 | 0.0015% | Yes |
| 1,2-Benzisothiazol-3(2H)-one EC: 220-120-9 | 2634-33-5 | 0.05% | Yes |
First Aid Measures
Emergency procedures for chemical exposure incidents
Remove person to fresh air. If signs/symptoms continue, get medical attention.
Wash off immediately with soap and plenty of water. Remove contaminated clothing. If irritation develops, get medical attention. Wash contaminated clothing before reuse.
Symptoms: Repeated or prolonged exposure may cause irritation of skin.
Hold eyelids apart and flush eyes with plenty of water for at least 15 minutes. Get medical attention.
Symptoms: Repeated or prolonged exposure may cause irritation of eyes.
If accidentally swallowed obtain immediate medical attention. Do NOT induce vomiting.
Symptoms: Ingestion may cause gastrointestinal irritation, nausea, vomiting and diarrhoea.
Immediate Medical Attention
If accidentally swallowed obtain immediate medical attention.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
Not combustible. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.
No information available.
The pressure in sealed containers can increase under the influence of heat.
Firefighter Protection
Use personal protective equipment.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Large spills should be collected mechanically (remove by pumping) for disposal.
The product should not be allowed to enter drains, water courses or the soil.
Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Pick up and transfer to properly labelled containers. Clean contaminated floors and objects thoroughly while observing environmental regulations.
Materials: inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust)
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Wear personal protective equipment. For personal protection see section 8. Avoid inhalation, ingestion and contact with skin and eyes. Do not use in areas without adequate ventilation. Smoking, eating and drinking should be prohibited in the application area.
Store in original container. Keep in properly labelled containers. Store between 5 and 35 ℃ in a dry, well ventilated place away from sources of heat, ignition and direct sunlight. Do not freeze.
Wash hands before breaks and immediately after handling the product. When using do not eat, drink or smoke.
Store away from sources of heat, ignition.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Use adequate ventilation and/or engineering controls in high temperature processing to prevent exposure to vapours. Ensure adequate ventilation, especially in confined areas.
Material: Nitrile rubber; Break through time: 480 min; Glove thickness: 0.1 - 0.4 mm; Remarks: Protective gloves complying with EN 374. Gloves should be discarded and replaced if there is any indication of degradation or chemical breakthrough.
Safety glasses with side-shields conforming to EN166
not required under normal use
not required under normal use Skin should be washed after contact. Remove and wash contaminated clothing before re-use.
The product should not be allowed to enter drains, water courses or the soil.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Stable under recommended storage conditions.
No dangerous reaction known under conditions of normal use.
None known.
Extremes of temperature and direct sunlight.
None known.
No decomposition if stored and applied as directed.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Plextol R 803?
The signal word is no signal word.
What is the physical form of Plextol R 803?
Plextol R 803 is a liquid appearing as liquid, aqueous dispersion with white color. It has ester-like odor.
What is Plextol R 803 used for?
Raw material Industrial use
What is the melting point of Plextol R 803?
The melting point is not determined and the boiling point is not determined.