Identification
Product identifiers, regulatory numbers, and supplier information
Product Information
- Product Name
- Silicon-Paint
- Product Code
- HT-AL-9400
Regulatory Identifiers
- CAS Number
- N/A
Manufacturers & Suppliers
Ronmas BV
+ 31(0)773543712
Ronmas Srl
+40-232-406100
Ronmas organization international
http://www.ronmas.com
Hazard Identification
GHS classification, signal word, pictograms, and hazard statements
Hazard Classifications
GHS Pictograms
GHS02
GHS07
Hazard Statements
Get a free compliance audit
Upload your SDS inventory and get a detailed compliance report
Composition / Information on Ingredients
Chemical components, concentration ranges, and hazardous substance identification
First Aid Measures
Emergency procedures for chemical exposure incidents
Ensure supply of fresh air. When inhaled remove to fresh air and seek medical aid.
Remove soiled or soaked clothing immediately. When in contact with the skin, clean with soap and water.
In case of contact with eyes rinse thoroughly with plenty of water and seek medical advice. Shield unaffected eye.
Calm. When swallowed accidentally, do not induce vomiting, get medical help.
Immediate Medical Attention
In case of accident or if you feel unwell, seek medical advice immediately.
Firefighting Measures
Extinguishing media, specific hazards, and firefighter protection
alcohol-resistant foam. dry powder. carbon dioxide. water mist.
water spray jet.
Large amounts of soot are formed in burning.
Firefighter Protection
Wear respiratory protection when fighting fires.
Accidental Release Measures
Spill cleanup procedures, containment, and environmental protection
Do not allow to enter drains.
Take up with absorbent material (eg sand, kieselguhr, universal binder). Dispose of as prescribed Clean equipment with a water/cleansing agent or solvent, e.g. Xylene.
Materials: absorbent material (eg sand, kieselguhr, universal binder), water/cleansing agent or solvent, e.g. Xylene
Related Products
Similar products with comparable safety profiles
Handling and Storage
Safe handling precautions, storage conditions, and workplace requirements
Keep away from sources of ignition - refrain from smoking. When working with open containers, adequate suctioning off of the vapours is necessary. Heated product evolves combustible vapours. Take precautionary measures against electrostatic loading. During processing and handling of the product, comply with the MATC-values and BG-Guidelines.
Keep in a cool place away from alkalies. Keep container tightly closed and dry in a cool, well-ventilated place. Containers should be protected against falling down.
Keep away from sources of ignition - refrain from smoking. Take precautionary measures against electrostatic loading - earthing necessary during loading operations.
Exposure Controls / PPE
Occupational exposure limits, engineering controls, and protective equipment
Additional hints on technical system design.
Protective gloves. Gloves (solvent-proof). Nitril gloves. breakthrough >= 480 min.
safety glasses with side protection shield.
Respiratory protective equipment.
protective overalls, antistatic.
Physical and Chemical Properties
Appearance, physical state, melting point, boiling point, and material characteristics
Stability and Reactivity
Chemical stability, hazardous reactions, and incompatible materials
Reactions with acids, alkalies and oxidizing agents.
acids, alkalies and oxidizing agents
Nitrous oxides (NOx). Carbon monoxide and carbon dioxide.
Ecological Information
Environmental toxicity, biodegradation, and bioaccumulation data
The data for this section has not been processed yet.
Disposal Considerations
Waste treatment methods, disposal recommendations, and waste codes
The data for this section has not been processed yet.
Transport Information
UN numbers, shipping names, transport classes, and regulatory requirements
- UN Number
- 1263
- Shipping Name
- PAINT
- Transport Class
- 3
- Packing Group
- III
Regulatory Information
Chemical regulations, safety assessments, and compliance status
The data for this section has not been processed yet.
Frequently Asked Questions
Common questions about safety, handling, and properties
What is the hazard signal word for Silicon-Paint?
The signal word is danger.
What is the physical form of Silicon-Paint?
Silicon-Paint is a liquid with black color. It has characteristic odor.
What are the hazard statements for Silicon-Paint?
This substance has 4 hazard statements:
- H225: Highly flammable
- H315: Irritating to skin
- H332: Harmful by inhalation and if swallowed
- H412: Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment