NextSDS Logo
Safety Data Sheet EN

FLUIDIRAM 797

Keep this SDS organized and up to date

Add this SDS to your NextSDS library and keep all its safety information in one place.

Add to my SDS library for free
01

Identification

Product identifiers, regulatory numbers, and supplier information

Product Information

Product Name
FLUIDIRAM 797

Regulatory Identifiers

CAS Number
N/A
UFI Code
VN20-308E-J00M-P6M0

Identified Uses

Formulation of fuel additives, lubricants and coating agents for fertilizers Industrial use as coating agent for fertilizers

Manufacturers & Suppliers

ARKEMA logo

ARKEMA

manufacturer

Specialty Surfactants 420 rue d'Estienne d'Orves 92705 Colombes Cedex, FRANCE

+33 (0)1 49 00 80 80

http://www.arkema.com

Emergency Contacts

Emergency Contact

+33 1 49 00 77 77

European emergency phone number

112

02

Hazard Identification

GHS classification, signal word, pictograms, and hazard statements

Classified danger

Hazard Classifications

Eye Dam. Cat. 1 H318
STOT RE Cat. 2 H373
Aquatic Acute Cat. 1 H400
Aquatic Chronic Cat. 1 H410

GHS Pictograms

GHS05 - Corrosive

GHS05

GHS08 - Serious health hazard

GHS08

GHS09 - Environmental hazard

GHS09

Hazard Statements

H318 Causes serious eye damage.
H373 May cause damage to organs through prolonged or repeated exposure.
H410 Very toxic to aquatic life with long lasting effects.

Precautionary Statements

P260 Do not breathe dust/ fume/ gas/ mist/ vapours/ spray.
P273 Avoid release to the environment.
P280 Wear protective gloves/protective clothing/eye protection/face protection.
P305 + P351 + P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P310 Immediately call a POISON CENTER or doctor/ physician.
P501 Dispose of contents or container to an approved waste disposal plant.

Still copying SDS data manually?Free

You don't have to. NextSDS reads this SDS and adds the information to your library automatically.

Let NextSDS do it for me
03

Composition / Information on Ingredients

Chemical components, concentration ranges, and hazardous substance identification

Type mixture

Preparation based on fatty amines derivatives. Contains unclassified mineral oils and waxes, note N/L

Chemical Name CAS Number Concentration Hazardous
Fatty acids, C16-18, compds. with C16-18-alkyl amines EC: 800-984-9 1428547-35-6 15% Yes
Amines, C16-18-alkyl EC: 292-550-5 90640-32-7 5% Yes
04

First Aid Measures

Emergency procedures for chemical exposure incidents

Inhalation

Move to fresh air. Oxygen or artificial respiration if needed. Keep under medical surveillance. In case of persistent problems : Hospitalise.

Skin contact

Wash off immediately with soap and plenty of water. Burns caused by molten material require hospital treatment.

Eye contact

Wash open eyes immediately, abundantly and thoroughly for at least 15 minutes. Consult an ophthalmologist immediately.

Ingestion

Do NOT induce vomiting. Consult a physician.

Immediate Medical Attention

Consult an ophthalmologist immediately (eye contact). Consult a physician (ingestion). Burns caused by molten material require hospital treatment.

Medical Treatment

Treat symptomatically.

05

Firefighting Measures

Extinguishing media, specific hazards, and firefighter protection

Suitable media

Foam, carbon dioxide, dry powder extinguishers., Use suitable means to extinguish neighbouring fires.

Unsuitable media

Water jet.

Specific hazards

Formation of toxic products through combustion: nitrogen oxides, Carbon oxides, Organic derivatives

Instructions

Cool closed containers exposed to fire with water spray.

Firefighter Protection

In the event of fire, wear self-contained breathing apparatus. Complete suit protecting against chemicals.

06

Accidental Release Measures

Spill cleanup procedures, containment, and environmental protection

Emergency procedures

Evacuate area of all unnecessary personnel.

Environmental

Do not release into the environment.

Cleanup methods

Keep in suitable, closed containers for disposal. Sweep up to prevent slipping hazard.

Materials: non-combustible absorbent material, (e.g. sand, earth, diatomaceous earth, vermiculite)

—

Related Products

Similar products with comparable safety profiles

F

FLUIDIRAM 797

UFI: VN20-308E-J00M-P6M0

F

FLUIDE G 3

---

F

FLUIDMATIC SYN T668

---

M

MOBILFLUID 424

---

B

B08/0104A FLUIDE G3 FF

UFI: K7FX-E8HS-G00U-QW4D

R

RAFINOL 930 FF

CAS: 70131-50-9

F

FLUIDMATIC HD XLD

---

F

FLAMMADUR® A 77 HF

---

07

Handling and Storage

Safe handling precautions, storage conditions, and workplace requirements

Handling

Smoking, eating and drinking should be prohibited in the application area.

Storage

Transported at 80°C in molten solid state.

Hygiene

Wash hands after handling. Remove contaminated clothing and protective equipment before entering eating areas.

08

Exposure Controls / PPE

Occupational exposure limits, engineering controls, and protective equipment

Engineering

Provide appropriate exhaust ventilation at machinery.

Hands

If splashes are likely to occur, wear: - Heat insulating gloves - Wear impermeable insulated gloves when handling hot. - Protective gloves complying with EN 374. - Request information on glove permeation properties from the glove supplier., The suitability for a specific workplace should be discussed with the producers of the protective gloves.

Eyes

Face-shield, or, Safety glasses with side-shields conforming to EN166, Eye wash bottle with pure water

Respiratory

Wear a respirator if necessary. In case of spillage, wear a mask. Recommended Filter type: Filter type AK Avoid breathing dust or vapour., In the case of vapour formation use a respirator with an approved filter.

Skin/Body

Protective suit

Environmental

See chapter 6

09

Physical and Chemical Properties

Appearance, physical state, melting point, boiling point, and material characteristics

Physical State
solid
Physical State Data
solid
State Under Standard Conditions
---
Appearance
solid, beige
Colour
beige
Colour Intensity
---
Form
---
Odor
No data available.
Odor Threshold
No data available.
Ph
Not applicable
Melting Point
ca. 70 °C
Boiling Point
No data available.
Flash Point
> 150 °C (Standard NF T 60 103)
Freezing Point
---
Softening Point
---
Solidification Point
---
Cloud Point
---
Crystallisation Point
---
Relative Evaporation Rate
---
Evaporation Rate
---
Vapor Pressure
No data available.
Vapor Density
---
Relative Density
---
Bulk Density
---
Density
0,823 g/cm³, at 80 °C
Flammability
Not relevant
Upper Explosive Limit
No data available.
Lower Explosive Limit
No data available.
Explosive Limits
---
Auto Ignition Temperature
No data available.
Decomposition Temperature
No data available.
Solubility
---
Partition Coefficient
FATTY ACIDS, C16-18, COMPDS. WITH C16-18-ALKYL AMINES: log Kow: = 4, at 20 °C, Expert judgement (OECD Test Guideline 107) AMINES, C16-18-ALKYL: May be considered as comparable to a similar product for which experimental results are: log Kow: = 4,33, at 25 °C (measured)
Solubility In Water
No data available.
Solubility In Fat
---
Molecular Weight
---
Voc Content
---
Metal Corrosion
---
Dynamic Viscosity
---
Kinematic Viscosity
11 mm²/s, at 80 °C
Properties Status
---
10

Stability and Reactivity

Chemical stability, hazardous reactions, and incompatible materials

Stability

No data available.

Reactivity

Stable under recommended storage conditions.

Hazardous reactions

No data available.

Avoid

No data available.

Incompatible

Powerful oxidants, strong acids and organohalogenated compounds.

Decomposition

Possible formation of carbon oxides, nitrogen oxides and hazardous organic compounds.

12

Ecological Information

Environmental toxicity, biodegradation, and bioaccumulation data

12.1. Toxicity:

Fish: From its composition, it must be considered as: Very toxic to fish

12.1. Toxicity:

Fish: FATTY ACIDS, C16-18, COMPDS. WITH C16-18-ALKYL AMINES : May be considered as comparable to a similar product for which experimental results are: LC50, 96 h (Danio rerio (zebra fish)) : = 0,23 mg/l (Method: OECD Test Guideline 203)

12.1. Toxicity:

Fish: AMINES, COCO ALKYL : LC50, 96 h (Danio rerio (zebra fish)) : 0,084 mg/l (Method: OECD Test Guideline 203)

12.1 Toxicity

Aquatic invertebrates: From its composition, it must be considered as: Very toxic to daphnia.

12.1. Toxicity

Aquatic invertebrates: FATTY ACIDS, C16-18, COMPDS. WITH C16-18-ALKYL AMINES : May be considered as comparable to a similar product for which experimental results are: EC50, 48 h (Daphnia magna (Water flea)) : = 0,088 mg/l (Method: OECD Test Guideline 202)

12.1. Toxicity:

Aquatic invertebrates: AMINES, COCO ALKYL : EC50, 48 h (Daphnia magna (Water flea)) : 0,032 mg/l (Method: OECD Test Guideline 202, Immobilization)

12.1 Toxicity

Aquatic plants: From its composition, it must be considered as: Very toxic to algae.

12.1. Toxicity:

Aquatic plants: FATTY ACIDS, C16-18, COMPDS. WITH C16-18-ALKYL AMINES : May be considered as comparable to a similar product for which experimental results are: ErC50, 72 h (Desmodesmus subspicatus (green algae)) : = 0,044 mg/l (Method: OECD Test Guideline 201)

12.1. Toxicity:

Aquatic plants: AMINES, COCO ALKYL : ErC50, 72 h (Desmodesmus subspicatus (green algae)) : = 0,016 mg/l (Method: OECD Test Guideline 201)

12.1. Toxicity:

Microorganisms: FATTY ACIDS, C16-18, COMPDS. WITH C16-18-ALKYL AMINES : May be considered as comparable to a similar product for which experimental results are: EC10, 3 h (Microorganisms) : = 15,5 mg/l (Method: OECD Test Guideline 209)

12.1. Toxicity:

Microorganisms: AMINES, C16-18-ALKYL : EC50, 3 h (Activated sludge) : 490,1 mg/l (Method: OECD Test Guideline 209)

12.1. Toxicity

Microorganisms: AMINES, COCO ALKYL : EC10, 3 h : 5,5 mg/l (Method: OECD Test Guideline 209, Respiration inhibition of activated sludge)

12.2 Persistence and degradability

12.3 Bioaccumulative potential

12.4 Mobility in soil

12.5 Results of PBT and vPvB assessment

12.6 Endocrine disrupting properties

12.7 Other adverse effects

12.1 Toxicity

Aquatic toxicity / Long term toxicity: Fish: FATTY ACIDS, C16-18, COMPDS. WITH C16-18-ALKYL AMINES : EC10, 32 d (Danio rerio (zebra fish)) : 6 µg/l (Method: OECD Test Guideline 210)

Aquatic toxicity / Long term toxicity

Aquatic invertebrates: FATTY ACIDS, C16-18, COMPDS. WITH C16-18-ALKYL AMINES : May be considered as comparable to a similar product for which experimental results are: NOEC, 21 d (Daphnia magna (Water flea)) : = 0,003 mg/l (Method: OECD Test Guideline 211)

12.1 Toxicity

Aquatic toxicity / Long term toxicity: Aquatic invertebrates: AMINES, COCO ALKYL : NOEC r, 21 d (Daphnia magna (Water flea)) : 0,0013 mg/l (Method: OECD Test Guideline 211, Reproduction inhibition)

12.1 Toxicity

Aquatic toxicity / Long term toxicity: Aquatic plants: FATTY ACIDS, C16-18, COMPDS. WITH C16-18-ALKYL AMINES : May be considered as comparable to a similar product for which experimental results are: ErC10, 72 h (Desmodesmus subspicatus (green algae)) : = 0,0165 mg/l (pH: 8)

12.1 Toxicity

Aquatic toxicity / Long term toxicity: Aquatic plants: AMINES, COCO ALKYL : NOEC r, 72 h (Desmodesmus subspicatus (green algae)) : 0,006 mg/l (Method: OECD Test Guideline 201)

12.1 Toxicity

FATTY ACIDS, C16-18, COMPDS. WITH C16-18-ALKYL AMINES : May be considered as comparable to a similar product for which experimental results are: NOEC, 8 Weeks (Eisenia fetida (earthworms)) : = 416 mg/kg ( Soil dw ) (Method: OECD Test Guideline 222) EC50, 28 d (Microorganisms) : > 1.000 mg/kg ( Soil dw ) (Method: OECD Test Guideline 217) EC10, 28 d (Microorganisms) : = 51 mg/kg ( Soil dw ) (Method: OECD Test Guideline 216)

12.1 Toxicity

FATTY ACIDS, C16-18, COMPDS. WITH C16-18-ALKYL AMINES : May be considered as comparable to a similar product for which experimental results are: NOEC, Test duration: 20 d : > 205 mg/kg (Method: OECD Test Guideline 208)

12.1 Toxicity

Non aquatic toxicity / Toxicity : Terrestrial plants: AMINES, C16-18 AND C18-UNSATD. ALKYL : May be considered as comparable to a similar product for which experimental results are: NOEC, Test duration: 21 d : > 100 mg/kg (Method: OECD Test Guideline 208)

12.2. Persistence and degradability

Biodegradation (In water): Based on the available information, it is not possible to conclude on biodegradability of this mixture. FATTY ACIDS, C16-18, COMPDS. WITH C16-18-ALKYL AMINES : May be considered as comparable to a similar product for which experimental results are:

Based on the available information, it is not possible to conclude on biodegradability of this mixture.

12.2. Persistence and degradability :

Biodegradation (In water): AMINES, HYDROGENATED TALLOW ALKYL : Readily biodegradable: 75 % after 28 d (Method: OECD Test Guideline 301 D)

12.2. Persistence and degradability

Biodegradation (In water): AMINES, COCO ALKYL : Readily biodegradable: 61 % after 28 d (Method: OECD Test Guideline 301 B)

12.3. Bioaccumulative potential

Bioaccumulation: All the products and/or main components quoted in section 3 and/or analogue substances/metabolites are expected to bioaccumulate.

All the products and/or main components quoted in section 3 and/or analogue substances/metabolites are expected to bioaccumulate.

12.3. Bioaccumulative potential :

### Bioaccumulation: FATTY ACIDS, C16-18, COMPDS. WITH C16-18-ALKYL AMINES : Partition coefficient: n-octanol/water: log Kow : = 4 , at 20 °C, Expert judgement (Method: OECD Test Guideline 107)

12.3. Bioaccumulative potential

AMINES, C16-18-ALKYL : May be considered as comparable to a similar product for which experimental results are: Partition coefficient: n-octanol/water: log Kow : = 4,33 , at 25 °C (Method: measured)

12.4. Mobility in soil - Distribution among environmental compartments: No data available.

No data available.

12.5. Results of PBT and vPvB assessment

Based on the available information, it is not possible to conclude on PBT and vPvB criteria according to REACH regulation, annex XIII.

It is not possible to conclude on PBT and vPvB criteria based on available information.

12.6. Endocrine disrupting properties:

Based on the available information, it is not possible to conclude on the endocrine disruptor potential. Based on the available information, it is not possible to conclude on the endocrine disruptor potential.

It is not possible to conclude on the endocrine disruptor potential based on available information.

12.7. Other adverse effects:

None known.
13

Disposal Considerations

Waste treatment methods, disposal recommendations, and waste codes

Treatment

Incinerate in suitable incineration plant, observing local authority regulations.

Disposal

The product should not be allowed to enter drains, water courses or the soil. Incinerate in suitable incineration plant, observing local authority regulations.

14

Transport Information

UN numbers, shipping names, transport classes, and regulatory requirements

UN Number
3077
Shipping Name
ENVIRONMENTALLY HAZARDOUS SUBSTANCE, SOLID, N.O.S. MOLTEN (FATTY ACIDS, C16-18, COMPDS. WITH C16-18-ALKYL AMINES, AMINES, C16-18-ALKYL)
Transport Class
9
Packing Group
III
15

Regulatory Information

Chemical regulations, safety assessments, and compliance status

?

Frequently Asked Questions

Common questions about safety, handling, and properties

What is the hazard signal word for FLUIDIRAM 797?

The signal word is danger.

What is the physical form of FLUIDIRAM 797?

FLUIDIRAM 797 is a solid appearing as solid, beige with beige color. It has no data available. odor.

What is FLUIDIRAM 797 used for?

Formulation of fuel additives, lubricants and coating agents for fertilizers Industrial use as coating agent for fertilizers

What are the hazard statements for FLUIDIRAM 797?

This substance has 3 hazard statements:

  • H318: Causes serious eye damage.
  • H373: May cause damage to organs through prolonged or repeated exposure.
  • H410: Very toxic to aquatic life with long lasting effects.

What is the melting point of FLUIDIRAM 797?

The melting point is ca. 70 °C and the boiling point is No data available..